BASIC OPERATION
12.AS/PS BUTTON
When shortly pressing the APS button on the front panel or the A/P button on the remote controller, the radio searches for each preset station. When the field strength level is more than the threshold level of stop level, the radio is holding at that preset number for few seconds with releasing mute, and then searches again. In FM band, FM 1,FM 2 and FM 3 is checked one at a time When long pressing the APS or A/P button (more than 1 second), the radio searches from the current frequency and checks the signal strength level until 1 cycle search is finished. And then 6 strongest stations are preset to the corresponding preset number. The AS operation is implemented in the each band of selected band. When the AS operation is finished, the radio executes the preset scan.
13.MU BUTTON
Press it to mute down sound. Press it again to release this mode and recover previous volume level.
14.CLK BUTTON
Press it to change the display to clock display. Press it again to return to previous display. In clock display, press and hold for about 2 seconds until the hour display flashes. Rotate VOL +/- button to adjust hours, press CLK button to flash mintue then rotate VOL +/- button to adjust minutes.
15.PWR BUTTON
Press it to turn on the unit. Press it again to turn off.
16.
BUTTON
Pressing 
during playback will stop play temporary. Return to normal playback, press 
once again.
17.
/ 
BUTTON
A.When long pressing the 
/ 
button (more than 2 seconds) during play, the speed of rapid forward/reverse changes according to the disc as follow.
DVD/VCD/CD/MP3:
Normal Playback 
2X 
4X 
6X 
8X
B. Shortly press the 
/ 
button during playback to skip to next track or back one track.
Note: For some VCD2.0 discs 
and 
buttons may be unavailable.
C. Press UP or DN button on the remote controller or 
/ 
on the front panel to manually tune up or down for your desired station. Press them hold for more than 2 seconds to automatically tune up or down for the stronger station.
12