RADIO OPERATION
•SELECTING BAND
Press BAND button (11) to change between three FM bands and two AM bands. Each band stores up to six preset stations.
FM1 
FM2 
FM3 
AM1 
AM2
•SELECTING STATION
During radio mode, press MAN/SKP button (13) to increase frequency or (14) to decrease frequency by one step of channel spacing. Hold the button longer for fast tuning. The frequency is updated correspondingly on display.
•SELECTING MEMORY
Press preset memory buttons (15) to preset stations at tuner mode. With this system, a total of 30 stations can be stored in the memory of six buttons.
The stations might be FM1, FM2, FM3, AM1 and AM2 band. The operation is as below:
-Store in Memory
Press and hold desired memory location button for several seconds. The current listening station will be stored into the number button.
-Retrieve a Preset Station
Press any one of the buttons (15) to retrieve a station which had been stored in the memory in advance the chosen number is shown on display.
•AUTO MEMORY STORING & SCANNING
-Auto Memory Scanning
Check the stations stored in the preset memories.
Press to retrieve automatically the current stations stored in six preset memories and it will display for several seconds. Press either the AS/PS button (16) again or anyone of the memory buttons to stop the scan operation. During the preset scan operation, the channel number flashes on the display for several seconds.
Preset station scan continuously in the
-Auto Memory Storing
Seeks the six strongest stations in the
Initially the tuner seeks and memories the stations in local mode until 6 stations are fully occupied. Otherwise, seeking is proceeded in distance mode.
11