Kenwood D-S300 Repeated playback, Repeat on, To repeat only the programmed tracks

	Repeated playback
	D-S300 (En)
1 8	Preparation ÷ Load a disc in the CD player.
	÷ Set the INPUT SELECTOR to ”CD“ on the

connected device such as AV CONTROL CENTER or receiver.

GRC operation

MULTIPLE CD PLAYER D-S300

: Complete the procedure in “Basic Operations

for the Graphical Remote Control Unit (GRC)”

90

: Keys and control used in the operations described on this page.

To repeat only the programmed tracks

RC operation GRC operation

1Press so that the “PGM” indicator lights.

Mode

P.MODE

ENTER

PGM

ENTER

P.mode

ENTER

Go to step 2 within 8 seconds.

2Select the desired track No.

				+10	1	2	3
1	2	3	4	5	4	5	6
6	7	8	9	0	7	8	9
					0	+10

ENTER

Go to step 3 within 8 seconds.

3Set the entry.

P.MODE	P.mode
	ENTER

4Repeat steps 2 – 3 above.

5Switch REPEAT ON.

REPEAT	Return
	ENTER
	Repeat
	ENTER

Main unit operation

The current status is displayed when the key is pressed once. When it is pressed while the status is displayed, the repeat ON status can be set to OFF (or vice versa).

6Start playback.

PGM

6	ENTER
	ENTER

PGM01 TNO.??

÷All of the programmed tracks will be repeated.

÷In case only one track is programmed, only that track will be repeated.

÷Up to 32 tracks can be programmed. When “FULL” is displayed, no more tracks can be programmed.

REPEAT ON

GRC operation

To display the current status, first select the Return icon and press the ENTER key, and then select the Repeat icon and press the ENTER key.

Pressing the ENTER key again while the status is displayed will set the repeat ON status to OFF (or vice versa).

To cancel repeated playback

Press the REPEAT key twice. (REPEAT ON → OFF) (