Radio Shack PLD35MU instruction manual Top side of the front panel

2. Common Operation

1.To turn on/off the unit

Under power off mode, press the POWER button to turn on the unit. Under power on mode, long press the POWER button on the front panel or briefly press the POWER button on the remote control to turn off the unit.

2.To select function mode

Press the MODE button to select TUNER, DISC(After inserting a disc), USB (After inserting a USB storage), Card(After inserting a MMC or SD card) or AUX mode.

3.To adjust sound level

Rotate the VOL knob on the front panel or press or hold the + or - button on the remote control to directly adjust the volume level.

4.To mute sound

Press the MUTE button on the remote control to turn on/off MUTE mode. Briefly pressing the POWER button on the front panel also can turn on/off MUTE mode.

In MUTE mode, the MUTE mode can be released by pressing the following buttons: MUTE, EJECT, VOL or +/-, SEL, POWER(on the front panel), MODE.

5.To display and adjust the clock time

Press the CLK button to display clock time on the small monitor of the front panel.

Then long press the CLK button to change the color of the hour of the clock, then rotate the VOL knob on the front panel or press the + or - button on the remote control to adjust the hour; and then briefly press the SEL button to change the color of the minute of the clock, then rotate the VOL knob on the front panel or press the + or - button on the remote control to adjust the minute.

6.To select a preset EQ mode

Press the EQ button to select the preset music equalizer curves: POP, ROCK, CLAS, FLAT . The sound effect will be changed.

7.To remove the front panel

Press the RELEASE button on the front panel to detach the front panel from the unit, then you can remove the front panel.

8.To select a optimal angle of the front panel

Press the TILT button repeatedly to select a optimal angle as follows: -->ANGLE0-->ANGLE1-->ANGLE2--> ANGLE3--> ANGLE4-->

9.To turn on/off LOUD mode

Press the LOUD button on the remote control to turn on/off LOUD mode.

When turning on LOUD mode, it will enhance bass level immediately when the bass is not enough.

10.To reset the unit

Press the RESET button to rehabilitate the distorted program to zero when the display is wrong or the function buttons are not effective.

11.To adjust the sound equalizer curves

To adjust the sound equalizer curves, briefly and repeatedly press the SEL button to select the sound equalizer curves of VOL, BAS(without preset EQ), TRE (without preset EQ), BAL, FAD, then rotate the VOL knob on the front panel or press the + or - button to adjust level.

3.During JPEG playback, press one of the >/</^/v buttons to change the angle of viewing picture that is displaying as follows:

>: 90 deg cw; <: 90deg ccw; ^:UP<-->DOWN; v: LEFT<-->RIGHT

During JPEG playback, press the PROG button to change the mode of refresh picture. During JPEG playback, press the STOP button to stop playing and return to the root menu.

*During JPEG playback, the following buttons are not available: SLOW-FWD, SUBTITLE, TITLE, ANGLE, STEP, SEARCH, INT and A-B.

*In JPEG mode,the other operations are same as ones in MP3/WMA mode.

5.16 MP4 Operation

1.The root menu is displayed on monitor when beginning to switch on DISC mode, then it will automatically play the first file.

During playback, press the STOP button to stop playing and return to the root menu.

2.When displaying the root menu, press the direction buttons to select your desired FOLDER or file, then press the OK or PLAY button to open the FOLDER, or play the

selected file.

When displaying the root menu, you can also use the number buttons to select the serial number of the file and play the file.

*The ANGLE, PROG, RDM, INT and TITLE/PBC button are not valid.

*The other functions are same as ones in DVD disc; but the RPT function is same as one in MP3/WMA.

5.17 ESP and ID3 Function

There is ESP function for all formats of discs.

In MP3/WMA mode, during playback, the information of the file name, folder name, song s title, artist and album will be scrolling on the LCD display. As long as the current playing MP3 music contains relevant ID3 tag information in version 1.0/2.0 format, the 3 items underlined above will be scrolling on the LCD display; otherwise, they will not.

5.18 USB and MMC/SD Reader Operation

Power on the DVD player, then insert the USB storage or MMC/SD Card, and then the monitor will display the root menu of the USB storage or MMC/SD Card.

All the operations are same as ones of the corresponding format.

When you want to insert a Card, need to tilt the front panel to an appropriate degree; When you want to pull out the Card, firstly push it, and then pull it out.

Card socket

SD/MMC

The top side of the front panel

5.19 The DVD System Menu Setup Operation

1.Press the SETUP button on the remote control to access the DVD System Menu on the monitor.

2.There are 6 setup pages in all for the System Menu. Press the > or < button to select an desired setup page.

3.Press the ^ or v button to select an setup item in the selected setup page.

4.Press the > button to enter the setup item. Then press the v or ^ button to select a

desired mode of the setup item, finally press the OK button to confirm it.

*Press the < button to return to the upper level.

*Press the SETUP button again or use the direction buttons to highlight the item of the EXIT SETUP and then press the OK button to exit the System Menu.