Radio Shack PLD35MU instruction manual Advanced Disc, USB or MMC/SD Operation

In VCD mode

1.When starting to turn on the PBC function, it will play from the beginning of the disc till it display the PBC menu on monitor screen if the disc include the PBC menu.

2.Press the number buttons to select your desired track to play.

In MP3/WMA mode

1.The root menu is displayed on the monitor screen all the time(and the TITLE or MENU button is not available).

2.Press the direction buttons to select your desired FOLDER, then press the OK or PLAY button to open the FOLDER, and then press the direction buttons to select your desired file, finally press the OK button to play the selected file.

In CD mode, the TITLE, PBC, MENU buttons are disabled.

4.7 Terminate the Playback

1.Press the EJECT button to slide down the front panel, then the disc in the disc compartment will come out automatically. and then remove the disc away.

2.Long press the POWER button on the front panel or briefly press the POWER button on the remote control to turn off the DVD player.

5. Advanced Disc, USB or MMC/SD Operation

5.1Playback with Speed

During normal playback, long press the UP/DN button on the front panel or the >>/<< button on the remote control continuously to fast forwards

or backwards at the following speeds: x2, x4, x8, x16, x20, normal. During speed playback, press the PLAY button to resume normal playback.

5.2 Playback with Slow Speed

During playback , press the SLOW_FWD button to execute the Slow Forward function.

With each consecutive pressing of the SLOW_FWD button, the playback speed decreases. The speed levels in Slow Forward as follows: x1/2,x1/3,x1/4,x1/5,x1/6,x1/7,normal.

During slow forward, press the PLAY button to resume normal playback.

The function is only for video.

5.3 Playback with still frame

If the unit is currently running DVD/VCD disc, press the STEP button consecutively to display the still frame forward with step by step.

Press the PLAY button to resume normal playback.

5.4 Playback Repeatedly

5.4.1 ONE/ALL Repeat

1.In the mode of DVD disc playback:

Press the RPT button to select RPT CHAPTER, RPT TITLE and RPT ALL.

2.In the mode of VCD(PBC OFF)/CD disc playback: press the RPT button to select RPT 1, RPT ALL.

When it is in the state of PBC ON, during VCD disc playing, the RPT button are not available.

3.In the mode of MP3/WMA disc playback:

Press the RPT button to select RPT 1, RPT DIR, RPT ALL.

5.4.2 A-B Repeat

Press the A-Bbutton if you want to repeat a specific segment on a disc that you define:

1.Press the A-Bbutton at a point (A) where you want it to be the start point of the repeat segment. Press the A-Bbutton again at a point (B) where you want it to be the terminal point of the repeat segment. Then it will play the segment repeatedly.

2.To cancel the A-B repeat mode and resume normal playback, press the A-Bbutton for the third time.

Note:

During VCD/MP3/WMA/CD playback, points A and B must be within the same track.

During DVD playback, points A and B can be selected from different chapters.