REMOTE CONTROL
Preparing the Remote Control
Inserting the Batteries
1.Open the battery compartment cover.
2.Insert the new batteries. Make sure that the positive and negative terminals of the batteries are oriented as indicated.
3.Close the cover
Battery: Two AAA size battery.
Using the Remote Control
Face the remote control towards the player front face IR mark (remote control signal reciver).
Operation angle: About ± 30 degree in each the direction of the front of the IR mark.
LOADING/EJECTING A DISC
Loading a Disc
When you have installed the unit and all connections have completed, you can load a disc as follows:
1.Turn the ignition on the the accessory position.
2.Press the POWER button (1).
3.Insert the disc with printed side facing up into the disc slot (2) (see below).
4.The player will start playback automatically.
1 2 3
Ejecting a Disc
Press
(EJECT) button (3) to eject the disc.
13