INSTALLATION
Fig. 1
Mounting Bracket
Levers
Tapping Screws (ø4x10)
Slots
DVD Bracket
Mounting Bolts (M3.5x10)
Rubber Caps
Fig. 2
1.Determine the mounting location and drill four mounting holes (See Fig.1).
2.Attach the mounting bracket to the holes with the tapping screws (ø4x10).
3.Let the two levers aim at the slots on the DVD bracket to fix the display unit.
4.Open the monitor to display the five screw holes.
5.Attach the unit to the bracket with the mounting bolts (M 3.5x10).
6.Insert five rubber caps to the screw holes.
7.When the installation has completed, you can also turn the display upward or downward, left or right to adjust the viewing angle. (See the arrowhead symbol in Fig.2).
8