(Green) | + | (Violet) | + |
(Green/Black) | - | (Violet/Black) | - |
1.Use a small screwdriver to move (2 ch) (4 ch) on the bottom of the stereo to (4 ch) (four channels).
2.Connect the gray FRONT RIGHT (+) wire to the front right speaker's positive terminal. The terminal is usually marked with a plus (+) sign or red mark.
3.Connect the gray/black FRONT RIGHT
4.Connect the white FRONT LEFT (+) wire to the front left speaker's positive terminal.
5.Connect the white/black FRONT LEFT
6.Connect the violet REAR RIGHT (+) wire to the right rear speaker's positive terminal.
7.Connect the violet/black REAR RIGHT
8.Connect the green REAR LEFT (+) wire to the rear left speaker's positive terminal.
9.Connect the green/black REAR LEFT
Connecting One Pair of Speakers
If you are using only one pair of speakers, follow these steps to connect the harness to the speakers.
1.Use a small screwdriver to move (2 ch) (4 ch) on the bottom of the stereo to (2 ch) (two channels).
2.Connect the gray FRONT RIGHT (+) wire to the right speaker's positive terminal. This terminal is usually marked with a plus (+) sign or red mark.
3.Connect the violet/black REAR RIGHT