Manuals / Onkyo / Home Audio / Stereo System

Onkyo SR607 Specifications, Amplifier Section, Video Section, Tuner Section, General

Models: SR607

1 108

Download 108 pages 3.38 Kb

Page 104

Specifications

Specifications

Amplifier Section

Rated Output Power
All channels:	North American and Taiwan:
	90 watts minimum continuous power
	per channel, 8 ohm loads, 2 channels
	driven from 20 Hz to 20 kHz, with a
	maximum total harmonic distortion
	of 0.08% (FTC)
	105 watts minimum continuous power
	per channel, 8 ohm loads, 2 channels
	driven at 1 kHz, with a maximum total
	harmonic distortion of 0.7% (FTC)
	110 watts minimum continuous power
	per channel, 6 ohm loads, 2 channels
	driven at 1 kHz, with a maximum total
	harmonic distortion of 0.1% (FTC)
	European:
	7 ch ⋅ 140 W at 6 ohms, 1 kHz, 1 ch
	driven (IEC)
Maximum Output Power
	Others:
	7 ch ⋅ 175 W at 6 ohms, 1 kHz, 1 ch
	driven (JEITA)
Dynamic Power	210 W (3 Ω, Front)
	180 W (4 Ω, Front)
	110 W (8 Ω, Front)
THD (Total Harmonic Distortion)
	0.08%
Damping Factor	60 (Front, 1 kHz, 8 Ω)

Input Sensitivity and Impedance

200mV/47 kΩ (LINE)

Output Level and Impedance

	200 mV/2.2 kΩ (REC OUT)
Frequency Response	5 Hz - 100 kHz/+1 dB - 3 dB (Direct
	mode)
Tone Control	±10 dB, 50 Hz (BASS)
	±10 dB, 20 kHz (TREBLE)
Signal to Noise Ratio	106 dB (LINE, IHF-A)
Speaker Impedance	North American and Taiwan:
	6 Ω - 16 Ω
	Others:
	4 Ω - 16 Ω

Video Section

Input Sensitivity/Output Level and Impedance

1 Vp-p/75 Ω (Component Y)

0.7Vp-p/75 Ω (Component PB/CB, PR/CR) 1 Vp-p/75 Ω (Composite)

Component Video Frequency Response

5 Hz - 50 MHz - 3 dB

Tuner Section

FM Tuning Frequency Range

	North American:
	87.5 MHz - 107.9 MHz
	European: 87.5 MHz - 108.0 MHz,
	RDS
	Others: 87.5 MHz - 108.0 MHz
AM Tuning Frequency Range
	North American: 530 kHz - 1710 kHz
	European: 522 kHz - 1611 kHz
	Others: 522/530 kHz - 1611/1710 kHz
Preset Channel	40

Digital Tuner (North American models only):

SIRIUS

General

Power Supply	North American: AC 120 V, 60 Hz
	European: AC 230 V, 50 Hz
	Others: AC 220 - 240 V, 50/60 Hz
	AC 120 V, 60 Hz
	AC 230 V, 50 Hz
Power Consumption	North American: 5.5 A
	European: 550 W
	Others: 550 W
	5.5 A

540 W

Dimensions (W ⋅ H ⋅ D)

	435 ⋅ 176 ⋅ 329 mm
	17-1/8" ⋅ 6-15/16" ⋅ 12-15/16"
Weight	North American and Taiwan:
	10.8 kg (23.8 lbs.)
	Others:
	11.0 kg (24.3 lbs.)
■ Video Inputs
HDMI	IN 1, IN 2, IN 3, IN 4, IN 5, AUX
Component	IN 1, IN 2
Composite	DVD/BD, VCR/DVR, CBL/SAT,
	GAME, AUX
■ Video Outputs
HDMI	OUT
Component	OUT
Composite	MONITOR OUT, VCR/DVR OUT
■ Audio Inputs
Digital Inputs	Optical: 2
	Coaxial: 2
Analog Inputs	DVD/BD, VCR/DVR, CBL/SAT,
	GAME, AUX (PORTABLE),
	TV/TAPE, CD
■ Audio Outputs
Analog Outputs	TV/TAPE, VCR/DVR,
	ZONE2 Line Out
Subwoofer Pre Outputs
	2
Speaker Outputs	Main (L, R, C, SL, SR, SBL, SBR)
	+ ZONE2 / Front High (L, R)
Phones	1

■Control Terminal

MICYes

Specifications and features are subject to change without notice.

104

Image 104

Onkyo SR607 Specifications, Amplifier Section, Video Section, Tuner Section, General, All channels, of 0.08% FTC

Contents

Contents TX-SR607Instruction Manual AV ReceiverImportant Safety Instructions AVISPrecautions For U.S. modelsFor Canadian Models Modèle pour les CanadienSupplied Accessories Precautions—ContinuedFor British models For European ModelsFeatures AmplifierProcessing ConnectionsZone 2 Room Multiroom CapabilityMain Room Contents Turning On & First Time SetupUsing the Listening Modes Advanced SetupFront & Rear Panels Front Panela b c d e f gh i j kl mn o p q North American/Taiwan modelsFront & Rear Panels—Continued Display Front & Rear Panels—ContinuedRear Panel Front & Rear Panels—Continueda b c d e f gh jk l m no p q rs i t tiFront & Rear Panels—Continued cCOMPONENT VIDEO IN 1 andRemote Controller Installing the BatteriesAiming the Remote Controller NotesRemote Controller—Continued About Home Theater Enjoying Home TheaterFront left and right speakers Front high left and right speakersConnecting the AV Receiver Connecting Your SpeakersSpeaker Configuration Using Dipole SpeakersConnecting the Speaker Cables Connecting the AV Receiver—ContinuedSpeaker Connection Precautions Connecting the AV Receiver—Continued North American/Taiwan modelsOther models rightConnecting the AV Receiver—Continued Bi-ampingthe Front SpeakersBi-ampingSpeaker Hookup Connecting Antenna Connecting the AM Loop AntennaConnecting the Indoor FM Antenna Connecting the AV Receiver—ContinuedConnecting an Outdoor FM Antenna Connecting an Outdoor AM AntennaConnecting the AV Receiver—Continued Using a TV/FM Antenna SplitterAbout AV Connections AV Connection Color CodingOptical Digital Jacks AV Cables & JacksConnecting Components with HDMI About HDMISupported Audio Formats About Copyright ProtectionMaking HDMI Connections Connecting the AV Receiver—ContinuedVideo Signals Audio SignalsConnecting Both Audio & Video Which Connections Should I Use?Video Connection Formats Connecting the AV Receiver—ContinuedSignal Selection Audio Connection FormatsConnecting the AV Receiver—Continued Connecting a TV or Projector c b AConnecting the AV Receiver—Continued HintConnecting a DVD Player Connecting the AV Receiver—ContinuedConnecting a VCR or DVD Recorder for Playback Connecting the AV Receiver—Continuedc b A HintNotes Connecting a VCR or DVD Recorder for RecordingConnecting the AV Receiver—Continued Connecting the AV Receiver—Continued c b AHint Satellite, cable, set-topbox, etcGame Console Connecting a Game ConsoleConnecting the AV Receiver—Continued Connecting a Camcorder or Other Device Connecting a Portable Audio playerConnecting the AV Receiver—Continued Signal flowConnecting a CD Player or Turntable Connecting the AV Receiver—ContinuedConnecting the AV Receiver—Continued Signal flowConnect one or the other Connection b , c must be assigned see pageConnecting an RI Dock Connecting the AV Receiver—ContinuedIf Your iPod Supports Video If Your iPod Doesn’t Support VideoConnecting Onkyo u Components Connecting the Power CordConnecting the AV Receiver—Continued NotesSmooth Operation in a Few Easy Steps Turning On the AV ReceiverTurning On and Standby First Time Setup Using the Display to change the settingsUsing the Onscreen Setup Menus Onscreen Setup Menus and DisplayFirst Time Setup—Continued Video Input SetupHDMI Input Setup The setup menu closesComponent Video Setup First Time Setup—ContinuedThe “Component Video Input” menu appearsDigital Input Setup First Time Setup—ContinuedThe “Input Assign” menu appears ExamplesSpeaker Settings Powered ZoneFirst Time Setup—Continued The “Speaker Settings” menu appearsTV Format Setup not North American models FM/AM Frequency Step Setup on some modelsFirst Time Setup—Continued The “OSD Setup” menu appearsChanging the Input Display First Time Setup—ContinuedNorth American/Taiwan models 200kHz/10kHz 50kHz/9kHzAudyssey 2EQ Room Correction and Speaker Setup Measurement PositionsFirst Time Setup—Continued About Audyssey Dynamic VolumeUsing Audyssey 2EQ First Time Setup—ContinuedWhen you’ve finished, press the ENTER button NotesFirst Time Setup—Continued CancelAudyssey 2EQ performs more measurements. This takes a fewError Messages First Time Setup—ContinuedSpeaker Detect Error microphoneChanging the Speaker Settings Manually Using a Powered SubwooferFirst Time Setup—Continued Writing ErrorBasic Operations Selecting the Input SourceAdjusting the Bass & Treble Setting the Display BrightnessBasic Operations—Continued Displaying Source InformationUsing the Sleep Timer Using HeadphonesMuting the AV receiver Basic Operations—ContinuedUsing the Tuner Tuning into Radio StationsListening to the Radio Listening to the RadioSelecting Presets Deleting PresetsListening to the Radio—Continued Presetting AM/FM StationsUsing RDS European models only RDS Program Types PTYListening to the Radio—Continued NotesDisplaying Radio Text RT Finding Stations by Type PTYListening to Traffic News TP Listening to the Radio—ContinuedUP-A1series Dock for iPod About the UP-A1series DockCompatible iPod models Putting Your iPod in the DockUP-A1series Dock for iPod—Continued Status messages UP-A1series Dock for iPod—ContinuedRecording 1 2 3AV Recording Recording Separate AV SourcesUsing the Listening Modes Selecting with the Remote ControllerSelecting Listening Modes Selecting on the AV receiverUsing the Listening Modes—Continued Listening Modes Available for Each Source FormatMono/Multiplex Sources NotesNotes Stereo SourceUsing the Listening Modes—Continued Notes 5.1 channel SourcesUsing the Listening Modes—Continued 7.1 channel Sources DTS-ESDiscrete/Matrix SourcesUsing the Listening Modes—Continued NotesAbout the Listening Modes Using the Listening Modes—ContinuedOnkyo Original DSP Modes Using the Listening Modes—ContinuedAdvanced Setup Onscreen Setup MenusMain menu SubmenusAdvanced Setup—Continued Common Procedures in Setup MenuSpeaker Setup Yes: Select if a subwoofer is connected defaultAdvanced Setup—Continued LPF of LFEDouble Bass*9 NotesAdvanced Setup—Continued continue with this procedureSurr Back L, Surr Left, Subwoofer NotesAudio Adjust Advanced Setup—ContinuedMain: The main channel is output default Off: Panorama function off defaultAdvanced Setup—Continued Dynamic Volume see pageCenter Image Dynamic EQUsing the Audio Settings Advanced Setup—ContinuedBass TrebleAdvanced Setup—Continued CinemaFILTER off default–15dB to +12 dB default: 0 dB –12dB to +12 dB default: 0 dBAssigning Listening Modes to Input Sources Advanced Setup—ContinuedThe signal format selection menu appears will beSource Setup IntelliVolumeA/V Sync Advanced Setup—ContinuedName Edit Advanced Setup—ContinuedTo correct a character NotesMiscellaneous Volume/OSD Setup Volume SetupOSD Setup Advanced Setup—ContinuedHardware Setup Remote ControlTuner HDMIAdvanced Setup—Continued NotesNotes NotesLock Setup Using the Video SettingsAdvanced Setup—Continued The “Lock Setup” menu appearsDigital Input Signal Formats Advanced Setup—ContinuedZoom Mode Zoom Normal Full: defaultConnecting Zone ZoneHookup North American/Taiwan modelsSetting the Powered Zone Connecting Your Zone 2 Speakers to an Amp in ZoneZone 2—Continued HookupUsing Zone Controlling Zone 2 from the AV receiverThe setup menu closes Zone 2—ContinuedControlling Zone 2 with the Remote Controller Adjusting the Volume for ZoneMuting Zones Zone 2—ContinuedPreprogrammed Remote Control Codes Looking up for Remote Control CodeControlling Other Components 3 4 56 7 8 Controlling Other Components—ContinuedThe setup menu closes If the brand name is not foundEntering Remote Control Codes Controlling Other Components—ContinuedThe codes are organized by category e.g., DVD player, TV, etcControlling Other Components—Continued Resetting REMOTE MODE ButtonsResetting the Remote Controller Controlling Other Components—Continued Controlling Other Components—Continued Controlling a VCR or PVR Controlling Other Components—ContinuedControlling Other Components—Continued aON/STANDBY buttonControlling Other Components—Continued Controlling an RI Dock Controlling Other Components—ContinuedControlling a Cassette Recorder Controlling Other Components—ContinuedaON/STANDBY button bPrevious and Next 7/6 buttonsTroubleshooting Power Can’t turn on the AV receiverAudio There’s no sound, or it’s very quiet Only the front speakers produce soundTroubleshooting—Continued Dock for iPod Troubleshooting—ContinuedTroubleshooting—Continued Video ATT:OFF: defaultRecording Can’t record • Video AttenuationSpecifications Amplifier SectionVideo Section Tuner SectionVideo Resolution Chart NTSCMemo Memo 2 9 3 4 4 9 5 ONKYO U.S.A. CORPORATIONONKYO EUROPE ELECTRONICS GmbH ONKYO EUROPE UK Office