
Controlling Other Components—Continued
Controlling an RI Dock
By pressing the REMOTE MODE button that’s been programmed with the remote control code for your Dock, you can control your iPod in the Dock with the following buttons.
For some RI docks, the [ON/STANDBY] button may not work with a remote control code 82990 (without RI). In this case, make an RI connection and enter a remote control code 82351 (with RI).
For details on entering a remote control code, see page 91.
When Using an RI Dock:
•Connect the RI Dock to the TV/TAPE IN, VCR/DVR IN, or GAME IN L/R jacks.
•Set the RI Dock’s RI MODE switch to HDD or HDD/ DOCK.
•Set the AV receiver’s Input Display to DOCK (see page 45).
•See to the Dock’s instruction manual for more infor- mation.
Press the appropriate
REMOTE MODE button first
a | h |
| i |
| j |
| k |
b | l |
c | m |
| |
| n |
d | o |
e | p |
f | q |
| r |
g | s |
aON/STANDBY button
Turns the iPod on or off.
Notes:
•This button does not turn the Onkyo
•Your iPod may not respond the first time you press this button, in which case you should press it again. This is because the remote controller transmits the On and Standby commands alternately, so if your iPod is already on, it will remain on when the remote control- ler transmits an On command. Similarly, if your iPod is already off, it will remain off when the remote con- troller transmits an Off command.
bTOP MENU button
Works as a Mode button when used with a
cArrow [q]/[w] and ENTER buttons
Used to navigate menus and select items.
dPrevious [7] button
Restarts the current song. Press it twice to select the previous song.
eRewind [5] button
Press and hold to rewind.
fPause [3] button
Pauses playback.
gREPEAT button
Used with the repeat function.
hDISPLAY button
Turns on the backlight for 30 seconds.
iMUTING button (53)
Mutes or unmutes the AV receiver.
jALBUM +/– button
Selects the next or previous album.
kVOL [q]/[w] button (51)
Adjusts the volume of the AV receiver.
lMENU button
Exits the menu.
mPLAYLIST [e]/[r] buttons
Selects the previous or next playlist on the iPod.
nPlay [1] button
Starts playback. If the component is off, it will turn on automatically.
oNext [6] button
Selects the next song.
pFast Forward [4] button
Press and hold to fast forward.
qStop [2] button
Stops playback and displays a menu.
rPLAY MODE button
Selects play modes on components with selectable play modes.
Works as a Resume button when used with a
sRANDOM button
Used with the shuffle function.
Note:
With some components, certain buttons may not work as expected, and some may not work at all.
98