First Time Setup—Continued

4

5

• Make the room as quiet as possible.

6

Background noise can disrupt the

 

room measurements. Close

 

windows, silence cell phones,

7

televisions, radios, air conditioners,

fluorescent lights, home appliances, light dimmers, or other devices.

Cell phones should be turned off or placed away from all audio electron- ics during the measurement process as Radio Frequency Interference (RFI) may cause measurement dis- ruptions (even if the cell phone is not in use).

Press [ENTER].

The room correction and speaker setup

starts.8

2EQ: Auto Setup

Do not unplug setup mic.

Please keep quiet.

Now measuring. . .

Test tones are played through each speaker as Audyssey 2EQ™ Room Correction and Speaker Setup runs. This process takes a few minutes.

Please refrain from talking during measurements and do not stand between speakers and the microphone.

The following screen appears.

2EQ: Auto Setup

Please place setup microphone at 2nd

of listening area at ear height.

Next

Place the setup microphone at

 

the next position (page 46), and

9

then press [ENTER].

Audyssey 2EQ performs more

 

measurements. This takes a few

 

minutes.

 

2EQ: Auto Setup

 

Do not unplug setup mic.

 

Please keep quiet.

 

Now measuring. . .

 

When prompted, place the setup microphone at the next position, and repeat step 5.

When the measurements are complete, the following screen appears.

2EQ: Auto Setup

Calculating...

When the calculations are com- plete, the following screen appears.

2EQ: Auto Setup

Review Speaker Configuration

Subwoofer

:

No

Front

:

Full Band

Center

:

80Hz

Surround

:

100Hz

Front High

:

150Hz

Surr Back

:

150Hz

Surr Back Ch

:

2ch

Save

Cancel

Use the Up and Down [q]/[w] but- tons to select an option, and then press [ENTER].

The options are:

Save:

Save the calculated settings and exit the room correction and speaker setup.

Cancel:

Cancel the room correction and speaker setup.

Note:

You can view the calculated settings for the speaker configuration, speaker dis- tances, and speaker levels by using the Left and Right [e]/[r] buttons.

If you selected “Save”, the results are saved, and the following screen appears.

2EQ: Auto Setup

Saving...

48

Page 48
Image 48
Onkyo SR607 instruction manual Press Enter, Following screen appears