Onkyo SR607 Using Zone, Controlling Zone 2 from the AV receiver, Zone 2—Continued, Not Act, Notes

Zone 2—Continued

4	Use the Up and Down [q]/[w]
	buttons to select “Powered

Zone 2”, and use the Left and

Right [e]/[r] buttons to select:

Not Act:

ZONE 2 L/R speaker terminals not activated (Powered Zone 2 dis- abled).

Act:

ZONE 2 L/R speaker terminals activated (Powered Zone 2 enabled).

5	Press the [SETUP] button.
	The setup menu closes.

Notes:

•When “Act” is selected and Zone 2 turned on, the Zone 2 speakers connected to the ZONE 2 L/R speaker terminals output sound, but the surround back or front high speakers connected to the SURR BACK/ FRONT HIGH L/R speaker terminals do not. When “Act” is selected and Zone 2 turned off, the surround back or front high speakers output sound as normal.

•When the “Powered Zone 2” setting is set to “Act” and the input selector of Zone 2 is selected, power consumption on standby mode slightly increases.

•Powered Zone 2 cannot be used if “Speaker Type” is set to “Bi-Amp” (see page 43).

•This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

Using Zone 2

This section explains how to turn Zone 2 on and off, how to select an input source for Zone 2, and how to adjust the volume for Zone 2.

Controlling Zone 2 from the AV receiver

ZONE 2 OFF

INPUT SELECTOR

1	To turn on Zone 2 and select an
	input source, press the [ZONE 2]
	button followed by an input
	selector button within 8 seconds.
	Zone 2 turns on, the ZONE 2 indicator
	lights up.
	To select AM or FM press the
	[TUNER] input selector button repeat-
	edly. On the North American model,
	you can also select SIRIUS.
	To select the same source as that of the
	main room, press the [ZONE 2] button
	repeatedly until “Z2 Selector: Source”
	appears on the display.
	Note:
	You cannot select different AM or FM
	radio stations for your main room and
	Zone 2. The same AM/FM radio station
2	will be heard in each room.
	To turn off Zone 2, press the
	[OFF] button.

Notes:

•While Powered Zone 2 is being used, listening modes that require surround back speakers (6.1/7.1), such as Dolby Digital EX, and DTS-ES are unavailable.

•When the “Powered Zone 2” setting is set to “Act” and the input selector of Zone 2 is selected, power consumption on standby mode slightly increases.

87