Onkyo SR607 TV Format Setup Not North American models, FM/AM Frequency Step Setup on some models

First Time Setup—Continued

TV Format Setup

(not North American models)

For the onscreen setup menus to display properly, you must specify the TV system used in your area.

1	Press the [RECEIVER] button fol-
	lowed by the [SETUP] button.

The main menu appears onscreen.

If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

2	Use the Up and Down [q]/[w] but-
	tons to select “6. Miscella-
	neous”, and then press [ENTER].
	The “Miscellaneous” menu appears.
		6. Miscellaneous
	1.	Volume Setup
	2.	OSD Setup

3	Use the Up and Down [q]/[w] but-
	tons to select “2. OSD Setup”,
	and then press [ENTER].
	The “OSD Setup” menu appears.
	6–2. OSD Setup
	Immediate Display	On
	Display Position	Bottom
	TV Format	Auto
	Language	English

4	Use the Up and Down [q]/[w] but-
	tons to select “TV Format”, and

then use the Left and Right [e]/ [r] buttons to select:

Auto: Select this to automatically detect the TV system from the video input signals.

NTSC: Select if the TV system in your area is NTSC.

PAL: Select if the TV system in your area is PAL.

5	When you’ve finished, press the
	[SETUP] button.
	The setup menu closes.

Note:

This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.

FM/AM Frequency Step Setup (on some models)

For FM/AM tuning to work properly, you must specify the FM/AM frequency step used in your area. Note that when this setting is changed, all radio presets are deleted.

1	Press the [RECEIVER] button,
	followed by the [SETUP] button.

The main menu appears onscreen.

If the main menu doesn’t appear, make sure the appropriate external input is selected on your TV.

2 Use the Up and Down [q]/[w] but- tons to select “7. Hardware Setup”, and then press [ENTER]. The “Hardware Setup” menu appears.

7. Hardware Setup

1.Remote ID

2.Tuner

3.HDMI

3	Use the Up and Down [q]/[w] but-
	tons to select “2. Tuner”, and
	then press [ENTER].
	The “Tuner” menu appears.
	(North American/Taiwan models)
	7–2. Tuner
	FM/AM Frequency Step	200kHz/10kHz
	SAT Radio Mode	None
	(Asian models)
	7–2. Tuner
	AM Frequency Step	9kHz

44