
Controlling Other Components—Continued
6
7
8
Use the arrow [q]/[w]/[e]/[r] but- tons to select a character, and then press [ENTER].
Repeat this step from the 1st character to the 3rd character of the brand name. When you have entered the 3rd charac- ter, select “Search” and press [ENTER].
After searching, a list of the brand name appears.
Remote Mode Setup | |
Category | |
TV | |
Brand | xxx |
Sharp
:
:
:
Sony
Not Listed
If the brand name is not found:
Use the Right [r] button to select “Not Listed”, and then press [ENTER].
The brand name input panel appears.
Use the Up and Down [q]/[w] but- tons to select brand, and then press [ENTER].
After searching, a remote control code and the input procedure appear. Try it.
|
|
|
|
Remote Mode Setup |
|
| |
Code |
|
| |
| |||
xxxxx | |||
1. While holding down Remote Mode
[ TV ], press and hold down [DISPLAY] (3 seconds).
2.Enter the
3.Push [MUTING] to see if the TV responds.
4.Push Remote Mode [RECEIVER].
5.Choose “Works” or “Doesn’t work”.
Works
Doesn’t work (try next code)
If you can control component, use the Up and Down [q]/[w] but- tons to select “Works”, and then press [ENTER].
The “Remote Mode Setup” menu appears.
If you cannot control component, use the Up and Down [q]/[w] but- tons to select “Doesn’t work (try next code)” and press [ENTER].
The next code is appear.
9 | When you’ve finished, press the |
| |
| [SETUP] button. |
| The setup menu closes. |
Note:
This procedure can also be performed on the AV receiver by using its [SETUP] button, arrow buttons, and [ENTER] button.
90