Onkyo SR607 instruction manual Front & Rear Panels—Continued, cCOMPONENT VIDEO IN 1 and

Front & Rear Panels—Continued

cCOMPONENT VIDEO IN 1 and 2

These RCA component video inputs are for con- necting components with a component video out- put, such as a DVD player, DVD recorder, or DVR (digital video recorder). They’re assignable, which means you can assign each one to an input selector to suit your setup. See “Component Video Setup” on page 41.

dCOMPONENT VIDEO OUT

This RCA component video output is for connect- ing a TV or projector with a component video input.

eHDMI IN 1–5 and OUT

HDMI (High Definition Multimedia Interface) con- nections carry digital audio and digital video.

The HDMI inputs are for connecting components with an HDMI output, such as a DVD player, Blu- ray Disc Player, DVD recorder, or DVR (digital video recorder). They’re assignable, which means you can assign each one to an input selector to suit your setup. See “HDMI Input Setup” on page 40. The HDMI output is for connecting a TV or projec- tor with an HDMI input.

fFM ANTENNA

This jack is for connecting an FM antenna.

AM ANTENNA

These push terminals are for connecting an AM antenna.

gMONITOR OUT V

The composite video jack should be connected to a video input on your TV or projector.

hUNIVERSAL PORT (36)

This jack is for connecting the component with the Universal Port connector such as UP-A1 series Dock.

iFRONT L/R, CENTER, SURR L/R, and SURR BACK L/R speakers

These terminal posts are for connecting the front L/R, center, surround L/R, and surround back L/R speakers.

The FRONT L/R and SURR BACK L/R terminal posts can be used with front speakers and surround back speakers respectively, or used to bi-amp the front speakers. See “Bi-amping the Front Speakers” on page 19”.

The SURR BACK L/R terminals can be used to connect the front high L/R speakers.

ju REMOTE CONTROL

This u(Remote Interactive) jack can be con- nected to an ujack on another Onkyo AV compo- nent. The AV receiver’s remote controller can then be used to control that component. To use u, you must make an analog audio connection (RCA) between the AV receiver and the other AV compo- nent, even if they are connected digitally.

kSIRIUS antenna (North American models only)

This jack is for connecting a SIRIUS Satellite Radio antenna, sold separately (see the separate SIRIUS instructions).

lCD IN

This analog audio input is for connecting a CD player’s analog audio output.

mTV/TAPE IN/OUT

This analog audio input and output are for connect- ing a recorder with an analog audio input and output (cassette, Mini Disc, etc.).

nGAME IN

Here you can connect a game console, etc. Input jacks include composite video and analog audio.

oCBL/SAT IN

Here you can connect a cable/satellite receiver, set- top box, etc. Input jacks include composite video and analog audio.

pVCR/DVR IN/OUT

Here you can connect a VCR or DVR (digital video recorder). Input and output jacks include composite video and analog audio.

qDVD/BD IN

Here you can connect a DVD/BD player. Input jacks include composite video and analog audio. You can connect a DVD/BD player’s 2-channel ana- log audio output.

rZONE 2 LINE OUT L/R

This analog audio output can be connected to a line input on an integrated amplifier in Zone 2. See “Connecting Zone 2” on page 85.

sPRE OUT: SUBWOOFER

This analog audio outputs can be connected to a powered subwoofer. The same signal is output from each jack.

tFRONT HIGH L/R speakers

These terminals are for connecting the front high L/R speakers.

The FRONT HIGH L/R terminal can be used with front high speakers respectively, or used to connect the speakers in Zone 2.

See “Connecting Zone 2” on page 85.

uAC INLET (On some model)

The supplied power cord is connected here. The other end of the power cord should be connected to a suitable wall outlet.

See pages 15-37 for connection information.

12