Phoenix Gold TI2 1600.5, TI2 1000.4 manual Ti2 1000.4 Specifications

Page 2

Amplifier Owner’s Manual

SPECIFICATIONS

Ti2 1000.4 SPECIFICATIONS

Frequency Response:

± 1dB from 20Hz to 20kHz

RMS Power Output

150w x 4 @ 4 ohms Stereo

Signal to Noise Ratio:

>100dB

 

250w x 4 @ 2 ohms Stereo

Crossover Slopes:

12dB per Octave

 

500w x 2 @ 4 ohms Bridged

Front High/Low Pass Crossover Range:

45Hz to 4kHz

 

 

Rear High Pass Crossover Range:

20Hz to 4kHz

Power/Ground Wire Size:

4 Gauge

Rear Low Pass Crossover Range:

40Hz to 4kHz

Recommend Power Wire Fuse:

80a

Low Level Input Range:

200 millivolts to 8 volts

Dimensions:

11.7” L x 7.1”W x 2.0” H

Lowest Recommend Load:

4 ohms Bridged/2 ohms Stereo

 

296mm L x 180mm W x 52mm H

Typical Efficiency:

80%

 

 

Damping Factor

Greater than 200

 

 

Ti2 1600.5 SPECIFICATIONS

FRONT AND REAR CHANNELS:

 

Frequency Response:

± 1dB from 20Hz to 20kHz

Signal to Noise Ratio:

>100dB

Crossover Slopes:

12dB per Octave

Front High Pass Crossover Range:

20Hz to 4kHz

Rear High Pass Crossover Range:

20Hz to 4kHz

Rear Low Pass Crossover Range:

40Hz to 4kHz

Low Level Input Range:

200 millivolts to 8 volts

Lowest Recommend Load:

4 ohms Bridged/2 ohms Stereo

Typical Efficiency:

80%

Damping Factor

Greater than 200

SUBWOOFER CHANNEL:

 

Frequency Response:

± 1dB from 20Hz to 300Hz

Signal to Noise Ratio:

>100dB

Crossover Slopes:

12dB per Octave

Low Pass Crossover Range:

20Hz to 300Hz

Subsonic Crossover Range:

10Hz to 50Hz

Variable Phase:

0 to 180 degrees

Low Level Input Range:

200 millivolts to 8 volts

Lowest Recommend Load:

2 ohms

Typical Efficiency:

80%

Damping Factor:

Greater than 200

RMS Power Output

125w x 4

@ 4 ohms Stereo

 

200w x 4

@ 2 ohms Stereo

 

400w x 2

@ 4 ohms Bridged

RMS Power Output

500w x 1 @ 4 ohms

 

800w x 1 @ 2 ohms

Recommend Power Wire Fuse:

100a

Power/Ground Wire Size:

4 Gauge

Dimensions:

14.4” L x 7.1”W x 2.0” H

 

366mm L x 180mm W x 52mm H

POWER OUTPUT NOTE: A power birth certificate is included for each amplifier. Ti2 amplifiers are conservatively rated and will exceed their RMS power rating shown here. All RMS power ratings and measurements are at 14.4 volts with no more than 1% THD. Ti2 1000.4 and Ti2 1600.5 feature ADAPT technology which provides the same power output from 11 to 15 volts with music material.

www.phoenixgold.com

Image 2
Contents Models Ti2 1000.4, Ti2 Amplifier Manual Manual DEL AmplificadorSpecifications Ti2 1000.4 SpecificationsKEY Features Channel Power Amplifier Phase SUB Input SwitchRear X-OVER Config FRONT, Rear and SUB InputsTI2 1000.4 Crossover Settings Rear HP Rear LPInstallation NOTESTI2 1600.5 Crossover Settings SubsonicAmplificador DE Potencia DE 4 Canales HPF/LPF Frecuencia de Crossover Amplificador DE Potencia DE 5 CanalesEntradas SUB Seleccion DE EntradeEntrée ConfigBorne Télécommande NiveauCommande À Distance DU Niveau DES Basses Sélection D’ENTRÉE SUBLimited Warranty on Amplifiers International Warranties

TI2 1000.4, TI2 1600.5 specifications

The Phoenix Gold TI2 series amplifiers, specifically the TI2 1600.5 and TI2 1000.4, are designed to deliver exceptional audio performance for car audio enthusiasts. These amplifiers have been engineered to meet the demanding needs of modern automotive sound systems, combining power, efficiency, and advanced technology.

The TI2 1600.5 is a powerful 5-channel amplifier that offers a robust output of 1600 watts. This model is particularly suited for those looking to drive multiple speakers and a subwoofer simultaneously, making it an ideal choice for comprehensive sound setups. The amplifier features a high-pass filter and a low-pass filter, allowing users to customize their sound to suit their preferences. With a compact size, it easily fits into tight spaces in any vehicle while maintaining a rugged build quality that can withstand the rigors of daily use.

On the other hand, the TI2 1000.4 is a 4-channel amplifier delivering 1000 watts of power, perfect for driving full-range speakers. It incorporates high-performance circuitry that ensures minimal distortion, maximizing sound clarity and impact. Both the TI2 1600.5 and TI2 1000.4 benefit from Phoenix Gold’s proprietary technology, such as the Delta Class D amplification system that enhances efficiency, reduces heat generation, and increases overall output.

Key features include an adjustable gain control, allowing users to fine-tune the output to match their specific audio needs. The amplifiers come equipped with a built-in bass boost, which enhances low-frequency sounds for a more dynamic listening experience. Additionally, each model boasts a thermal protection circuit that prevents overheating, ensuring reliability during extended use.

Both the TI2 1600.5 and TI2 1000.4 are compatible with a variety of input sources, making them versatile solutions for different audio setups. They also include high-level inputs, allowing easy integration into factory stereo systems without the need for a dedicated line-out converter.

Whether you are aiming for loud, powerful bass or crystal-clear highs, the Phoenix Gold TI2 series amplifiers provide the performance and flexibility necessary to elevate your car audio experience. With their advanced features and dependable technology, they stand out in the competitive world of automotive audio enhancement.