Orion Car Audio C0600.2 CEA Specifications, High Level Harnesses, Amplifier Settings, Input Gain

Page 6

CEA Specifications

CO300..2

Power Output: 60 Watts RMS x 2 at 4 ohms and < 1% THD+N

Signal to Noise Ratio: -75 dBA (reference Watt into 4 ohms)

Additional Power: 80 Watts RMS x 2 at 2 ohm and < 1% THD+N

CO600..2

Power Output: 100 Watts RMS x 2 at 4 ohms and < 1% THD+N

Signal to Noise Ratio: -75 dBA (reference Watt into 4 ohms)

Additional Power: 155 Watts RMS x 2 at 2 ohm and < 1% THD+N

HIGH LEVEL HARNESSES

Do not connect the high level input connections to power, signal, or chassis ground as damage to the head-unit outputs may result.. The high-level inputs are designed to work with either grounded or BTL speaker level outputs (found on most head units)..

HIGH LEVEL CONNECTIONS

WIRE COLOR

INPUT CONNECTION

 

 

Black

Ground

 

 

White/Black

- Left channel

 

 

White

+ Left channel

 

 

Gray/Black

- Right channel

 

 

Gray

+ Right channel

 

 

Amplifier Settings

Signal Input and Output Configurations

The input section of the amplifier consists of a phase switch that sets the output configuration, gain controls, and RCA inputs.. The input section makes it easy to adapt this amplifier to most system configurations..

Input Gain

The Orion Cobalt CO300..2 and CO600..2 amplifiers have level adjustments to allow for easy integration with any source unit.. The input sensitivity can be adjusted from 175mV to 8V.. Refer to Testing the System and Adjusting the Sound of the System sections of this guide for detailed instructions on setting the gain..

© 2007 directed electronics—all rights reserved

5

Image 6
Contents Amplifier Model Table of Contents Introduction WHAT’S in the BOXPractice Safe Sound Tools of the Trade End Panel LayoutsInput Plate Output Plate Signal Input and Output Configurations CEA SpecificationsAmplifier Settings High Level HarnessesAmplifier Wiring Bridging Amplifier InstallationTri-mode Choosing Mounting LocationsPassenger Compartment General Precautions and Installation TipsStep By Step Installation Trunk CompartmentSet Up and Troubleshooting Testing the SystemAdjusting the Sound of the System Troubleshooting Tips Symptom Probable Cause Action To TakeSymptom Probable Cause Action To Take Specifications Amplifier Section CO300.2 CO600.2Crossover Section Directed electronics-all rights reserved Français Agencement DES Panneaux DextrémitéFaisceaux À Haut Niveau Configurations dentrée et sortie du signalSpécifications DE Lace Réglages DE LamplificateurCâblage DE Lamplificateur Installation DE Lamplificateur Installation étape par étape Réglage ET Dépannage Essai du systèmeRéglage sonore du système Directed electronics-all rights reserved Conseils de dépannage Symptôme Cause probable FaireDirected electronics-all rights reserved Spécifications Section amplificateur CO300.2 CO600.2Section répartiteur Español Disposiciones del panel de extremoEspecificaciones de la CEA Configuraciones del amplificadorConfiguraciones de salida y entrada de señal Arneses DE Cableado DE Alto NivelCableado del amplificador Instalación del amplificador Instalación paso a paso Configuración y detección y reparación de averías Prueba del sistemaAjuste de sonido del sistema Directed electronics-all rights reserved Sugerencias de detección y reparación de averías Síntoma Causa probable Medidas a tomarDirected electronics-all rights reserved Especificaciones Sección de amplificador CO300.2 CO600.2Sección de crossover Deutsche Layouts der EndabdeckungHOCHPEGEL-LEITUNGSSYSTEME Signaleingangs- und -ausgangskonfigurationenCEA-DATEN VerstärkereinstellungenVerstärkeranschluss Verstärkerinstallation Schrittweise Installation Einrichtung und Problembehebung SystemtestSystemsound einstellen Directed electronics-all rights reserved Problemlösungen Symptom Mögliche Ursache LösungDirected electronics-all rights reserved Daten Verstärkerbereich CO300.2 CO600.2Crossover-Bereich Italiano Layout dei pannelli terminaliCavi DI Livello Alto Configurazione dei segnali d’ingresso e di uscitaSpecifiche CEA Impostazioni dell’amplificatoreCrossover passa-basso Cablaggio dell’amplificatoreCrossover interni Crossover passa-altoInstallazione dell’amplificatore Procedura di installazione Messa a punto e soluzione dei problemi Prova dell’impiantoRegolazione dell’audio dell’impianto Directed electronics-all rights reserved Soluzione dei problemi Sintomo Causa probabile Intervento necessarioDirected electronics-all rights reserved Dati tecnici Sezione amplificatore CO300.2 CO600.2Sezione crossover Português Layouts dos painéisLigações DE Alto Nível Configurações de entrada e saída dos sinaisEspecificações da CEA Ajustes do amplificadorConexão dos cabos do amplificador Instalação do amplificador Instalação passo a passo Instalação e resolução de problemas Como testar o sistemaComo ajustar o som do sistema Directed electronics-all rights reserved Sugestões para resolução de problemas Problema Provável causa Medida a ser tomadaReajuste os crossovers.. Consulte as instruções Especificações Seção do amplificador CO300.2 CO600.2Seção do crossover Warranty

C0600.2, C0300.2, Amplifier specifications

Orion Car Audio has been synonymous with powerful and high-quality sound amplification for years, and their amplifiers C0300.2 and C0600.2 exemplify this legacy. Designed for car audio enthusiasts looking for robust performance and reliability, these models are packed with innovative features that ensure an exceptional listening experience.

The Orion C0300.2 is a compact yet powerful two-channel amplifier that delivers a peak power output of 300 watts. It is engineered with a Class AB topology, combining the efficiency of Class D with the audio fidelity of Class A, making it suitable for a variety of audio systems. Its adjustable gain control allows users to fine-tune the amplifier to match their specific car stereo setup, ensuring that every note is crisp and clear. The C0300.2 also incorporates a built-in crossover system that lets users set the frequency range for each channel, resulting in optimized sound output tailored to the speakers being used.

On the other hand, the C0600.2 amplifier steps things up with a more powerful output, reaching a peak of 600 watts across its two channels. This amplifier is ideal for those who desire a high-impact audio experience, delivering deep bass and pristine highs. Similar to its counterpart, the C0600.2 employs a Class AB design, allowing for high efficiency and better thermal management. This feature ensures that even during extended playback, the amplifier remains cool, preventing overheating and potential damage to the internal components.

Both amplifiers boast a sleek design with a durable chassis, providing not only robust performance but also an aesthetic that fits well within modern car interiors. The integrated short circuit and thermal protection circuits safeguard the amplifier against potential damage, adding to the reliability that Orion is known for.

In addition to their powerful output and efficient designs, both models offer flexibility in installation with multiple mounting options and a user-friendly interface. These features make the C0300.2 and C0600.2 amplifiers perfect choices for anyone looking to enhance their vehicle's audio system, delivering performance that meets the demands of car audio enthusiasts everywhere.

With features designed to maximize sound quality and system compatibility, the Orion Car Audio amplifiers stand as a leading choice for those who appreciate superior audio performance in their vehicles. Whether for daily commuting or enjoying long road trips, these amplifiers elevate the driving experience to a whole new level.