Troubleshooting Tips

Symptom Probable Cause	Action To Take

No output

Low or no remote turn-on	Check remote turn-on voltage at voltage
	amplifier and repair as needed..

Fuse blown	Check power wire's integrity and check for
	speaker shorts.. Fix as needed and replace
	fuse..

Power wires not connected	Check power wire and ground connections
	and repair or replace as needed..

Audio input not connected..	Check RCA connections and repair or replace
	as needed..

Speaker wires not connected	Check speaker wires and repair or replace as
	needed..

Speaker are blown	Check system with known working speaker
	and repair or replace speakers as needed..

Audio cycles on and off

Thermal protection engages	Make sure there is proper ventilation for am-
when amplifier heat sink tem-	plifier and improve ventilation as needed..
perature exceeds 50º C (122º F)

Loose or poor audio input	Check RCA connections and repair or replace
	as needed..

Loose power connections	Check power wires and ground connections
	and repair or replace as needed..

Distorted output

Amplifier level sensitivity set	Readjust gain.. Refer to the Adjusting the
too high exceeding maximum	Sound of the System section of this manual
capability of amplifier	for detailed instructions..

Impedance load to amplifier	Check speaker impedance load, if below 2Ω,
too low	rewire the speakers to achieve higher imped-
	ance.
Shorted speaker wires	Check speaker wires and repair or replace as
	needed..

Speaker not connected to am-	Check speaker wires and repair or replace as
plifier properly..	needed.. Refer to the Speaker Connections
	section of this manual for detailed instruc-
	tions

Internal crossover not set prop- Readjust crossovers.. Refer to the Internal
erly for speakers	Crossover Configuration section of this
	manual for detailed instructions..

Speakers are blown	Check system with known working speakers
	and fix or replace as needed..

Poor bass response

Speakers wired with wrong	Check speaker polarity and fix as needed..
polarity causing cancellation at
low frequencies..

C0600.2, C0300.2, Amplifier specifications

Orion Car Audio has been synonymous with powerful and high-quality sound amplification for years, and their amplifiers C0300.2 and C0600.2 exemplify this legacy. Designed for car audio enthusiasts looking for robust performance and reliability, these models are packed with innovative features that ensure an exceptional listening experience.

The Orion C0300.2 is a compact yet powerful two-channel amplifier that delivers a peak power output of 300 watts. It is engineered with a Class AB topology, combining the efficiency of Class D with the audio fidelity of Class A, making it suitable for a variety of audio systems. Its adjustable gain control allows users to fine-tune the amplifier to match their specific car stereo setup, ensuring that every note is crisp and clear. The C0300.2 also incorporates a built-in crossover system that lets users set the frequency range for each channel, resulting in optimized sound output tailored to the speakers being used.

On the other hand, the C0600.2 amplifier steps things up with a more powerful output, reaching a peak of 600 watts across its two channels. This amplifier is ideal for those who desire a high-impact audio experience, delivering deep bass and pristine highs. Similar to its counterpart, the C0600.2 employs a Class AB design, allowing for high efficiency and better thermal management. This feature ensures that even during extended playback, the amplifier remains cool, preventing overheating and potential damage to the internal components.

Both amplifiers boast a sleek design with a durable chassis, providing not only robust performance but also an aesthetic that fits well within modern car interiors. The integrated short circuit and thermal protection circuits safeguard the amplifier against potential damage, adding to the reliability that Orion is known for.

In addition to their powerful output and efficient designs, both models offer flexibility in installation with multiple mounting options and a user-friendly interface. These features make the C0300.2 and C0600.2 amplifiers perfect choices for anyone looking to enhance their vehicle's audio system, delivering performance that meets the demands of car audio enthusiasts everywhere.

With features designed to maximize sound quality and system compatibility, the Orion Car Audio amplifiers stand as a leading choice for those who appreciate superior audio performance in their vehicles. Whether for daily commuting or enjoying long road trips, these amplifiers elevate the driving experience to a whole new level.

Troubleshooting Tips

Symptom Probable Cause

Action To Take

Crossover Configuration section of this

C0600.2, C0300.2, Amplifier specifications