Description, Frequency response | Peavey SP 118 specification

SPECIFICATIONS

SP™ 118

Description

The SP 118 is a subwoofer designed to enhance the low end in SP and other full-range speaker systems. Other uses include bass guitar, keyboard and drum monitoring.

The enclosure is constructed of Aspen hardwood plywood with internal bracing covered in a heavy-duty, textured Hammertex™ covering.

A powder-coated, perforated steel grille covers the front of the enclosure. Recessed steel handles on either side provide portability. A pole guide for support of a pole-mounted, high-pass enclosure is provided on the top face of the SP 118. Rubber feet are provided on the bottom and also on one side for horizontal use.

Inputs are at the rear of the enclosure, and consist of two 1/4" jacks and one four-pin twist lock connector. All inputs are in parallel, with the +1 and –1 pins of the Neutrik jack connected to the Pro Rider® driver and other jacks.

This low frequency enclosure is comprised of a single 18" Pro Rider subwoofer driver in a vented alignment. The Pro Rider driver delivers superior performance due to its advanced cooling system, large 4" voice coil with edge-wound aluminum wire and Kevlar® composite cone. This design provides strong bass extension and high power handling to complement a full-range sound system.

As the SP 118 does not include a passive subwoofer crossover, input should be electronically filtered for subwoofer applications. In addition, for high power operation, a high-pass filter set at 35 to 40 Hz and 12 to 24 dB Butterworth should be used to improve performance and reliability.

Frequency response

This measurement is useful in determining how accurately a given unit reproduces an input signal. The frequency response of the SP 118 is measured at a distance of 1 meter using a 1 watt (into the nominal impedance) swept-sine input signal in an anechoic environment. As shown in figure 1, the selected drivers in the SP 118 combine to give a smooth frequency response from

49 Hz to 300 Hz.

Power handling

There are many different approaches to power handling ratings. Peavey rates this loudspeaker system’s power handling using a modified form of the AES Standard 2-1984. Using 40 Hz to 400 Hz pink noise with peaks of four times the RMS level, this strenuous test signal assures the user that every portion of this system can withstand today’s high technology music. This rating is contingent upon having a minimum of 3 dB available amplifier headroom.

Harmonic distortion

Second and third harmonic distortions vs. frequency are plotted in figures 3

&4 for two power levels: ten percent

(10%) of rated input power and either one percent (1%) of rated input power or 1 Watt, whichever is greater. Distortion is read from the graph as the difference between the fundamental signal (frequency response) and the desired harmonic. As an example, a distortion curve that is down 40 dB from the fundamental is equivalent to 1% distortion.

Architectural & engineering specifications

The loudspeaker system shall have an operating bandwidth of 49 Hz to 300 Hz. The nominal output level shall be

98.0dB when measured at a distance of one meter with an input of one Watt. The nominal impedance shall be 8.0 Ohms.

The maximum continuous power handling shall be 600 watts, maximum program power of 1,200 watts and a peak power input of at least 2,400 watts, with a minimum amplifier headroom of 3 dB.

The outside dimensions shall be 32.29 inches high by 20.80 inches wide by

29.88inches deep. The weight shall be 107 lbs. The loudspeaker system shall be a Peavey model SP 118.

3 + 2 Year Limited Warranty

NOTE: For details, refer to the warranty statement. Copies of this statement may be obtained by contacting Peavey Electronics Corporation, P.O. Box 2898, Meridian, Mississippi 39301-2898.

SP 118 specifications

The Peavey SP 118 is a powerful subwoofer designed for professional audio applications, delivering deep low-frequency performance that enhances any sound system. This subwoofer is known for its reliability and robust construction, making it a favorite for live sound, clubs, and installation settings.

One of the standout features of the Peavey SP 118 is its high-efficiency 18-inch transducer. This driver is capable of producing an impressive bass response, ensuring that even the lowest frequencies are articulated with clarity and punch. The SP 118 has a frequency response that extends down to 30 Hz, which allows it to reproduce sub-bass frequencies that are felt as much as they are heard, providing an immersive listening experience.

Power is a critical aspect of any subwoofer, and the SP 118 does not disappoint. It is equipped with a continuous power handling capacity of 600 watts, and it can handle peaks of up to 2400 watts. This means that it can deliver substantial volume levels without distortion, making it suitable for high-energy environments like concerts and events.

The enclosure of the Peavey SP 118 is constructed from durable plywood, offering strength and durability while minimizing unwanted resonance. The design includes built-in handles for easy transport, and it is finished with a rugged, black carpet covering that stands up to the rigors of professional use. Additionally, it features a built-in pole mount, allowing it to be easily paired with full-range speakers for a complete sound system setup.

For connectivity, the SP 118 is equipped with dual speakON connectors, enabling versatile connections to amplifiers and other components. This simplifies setup and ensures secure connections to prevent signal loss.

Technologically, Peavey has incorporated advanced features into the SP 118, such as an optimized enclosure design that enhances the speaker’s overall acoustic performance. This combines with Peavey’s decades of expertise in audio engineering to create a subwoofer that meets the demands of both touring professionals and fixed installations.

Overall, the Peavey SP 118 is a notable subwoofer that offers exceptional performance, rugged construction, and user-friendly features. It delivers powerful low-frequency sound that is essential for any audio application, ensuring that it remains a vital component of sound reinforcement setups for years to come.