DISC/USB/SD/MMC Interface Operation | Power Acoustik PD-930T

◆DISC/USB/SD/MMC INTERFACE OPERATION

When a file disc, USB or a memory card is played, the screen will show following interface:

Mute the sound.

Stop button. Press it to stop playback from the current track, press it again to final stop to the very beginning

Play/pause button. Press it to pause the track, press again to resume.

Press it button to restart a track, FR×2×4×8×20-play will be display.

Press it button to skip to the next track.

FF×2×4×8×20-play will be display.

Press it to skip to the previous track.

Press it to skip to the next track.

Press it to activate the intro function. You can play the beginning of every track for 10 seconds in sequence.

Press it to repeat REP 1 => REP DIR => REP

ALL

Press it to play track randomly.

Press it to enter previous page.

Press it to enter next page.

Press it to go to folder selection.

◆AV-IN MODE

To start AV-IN Mode, tap on AV-IN button from main menu screen.

Connect the external audio/video signal source to this unit. Select AV-IN mode in the main menu or by pressing repeat Mode button on the front panel.

Note: If there is no external video input, the TFT displays “NO SIGNAL”.

Press the icon to be back to main menu.

◆SETTING CONTROL

Your device has default system settings. You can customize the settings to suit your personal needs. Once you change settings, your new settings will remain until you change it again.

To start SETTING, tap it on main menu screen.