SPEAKER CONNECTIONS (BRIDGED)
The California amplifiers are capable of being bridged in a mono configuration. This feature allows you the flexibility of using the amplifier to drive a ** subwoofer or a center channel. In this configuration the amplifier sums the right and left channel to deliver one channel (mono) output.
Please note: in order for the amplifier to sum right and left signal information, both right and left RCA connections must be made.
**CAUTION! In the bridged mode, the amplifier must see a 4 Ohm load or higher. Any lower than 4 Ohms will cause the amplifier to overheat and possibly cause permanent damage to the amplifier!
B + REM GND | L + | L - R + R - |
FUSE
BRIDGED 
+ -
4 Ohm Speaker
TWO CHANNEL BRIDGED SPEAKER CONNECTIONS
|
|
| CH1, 2 |
|
|
|
| CH3, 4 |
|
|
| FUSE |
|
| ||||
L + | L - R + R - L + | L - R + R - |
|
| B + REM GND | |||||||||||||
|
|
| BRIDGED |
|
|
|
|
| BRIDGED |
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
| ||||||||
+-
+-
4 Ohm Speaker | 4 Ohm Speaker |
FOUR CHANNEL BRIDGED SPEAKER CONNECTIONS
10