Specifications

5-1/4" carbon/glass fiber with butyl rubber surround

1" fluid-cooled ultra-wide dispersion tri-laminate Teteron tweeter in a custom pivoting coaxial enclosure

Recommended Amplifier Power

10 to 100 watts per channel

Nominal Impedance

4 or 8 ohm selectable

Frequency Response

60Hz to 21kHz, +/- 3dB (on axis)

Tweeter Adjustment

Up to 20° pivot angle

Sensitivity

88dB for 2.83 volts of Pink Noise

Overall Exterior Frame Dimensions

8-1/8" diameter

Depth Behind Wall

3-3/8" deep (based on 1/2" drywall)

Wall Cut-Out Dimensions

6-7/8" diameter

We recommend 16 to 18 gauge stranded wire for up to 80 feet, 14 gauge stranded wire for up to two hundred feet.

Connectors accommodate 12 to 18 gauge stranded wire.

Driver Compliment

6-1/2" carbon/glass fiber with butyl rubber surround

1" fluid-cooled ultra-wide dispersion tri-laminate Teteron tweeter in a custom pivoting coaxial enclosure

Recommended Amplifier Power

10 to 125 watts per channel

Nominal Impedance

4 or 8 ohm selectable

Frequency Response

50Hz to 21kHz, +/- 3dB (on axis)

Tweeter Adjustment

Up to 20° pivot angle

Sensitivity

89dB for 2.83 volts of Pink Noise

Overall Exterior Frame Dimensions

9-1/4" diameter

Depth Behind Wall

3-3/4" deep (based on 1/2" drywall)

Wall Cut-Out Dimensions

8" diameter

Wiring Requirements

We recommend 16 to 18 gauge stranded wire for up to 80 feet, 14 gauge stranded wire for up to two hundred feet.

Connectors accommodate 12 to 18 gauge stranded wire.