CLASS D TECHNOLOGY
MMATS Professional Audio is the industry leader in
Your D600.2 amplifier is engineered using the best technology we have at MMATS.
Surface mount technology
Large geometry power MOSFETs
Leading edge pulse width modulation design
D600.2 amplifiers are the perfect match for producing bass from large speakers in an automotive environment. Since most of the acoustic energy needed to produce full range audio is in the bass frequencies, it makes sense to dedicate your system’s most powerful amplifiers to this task. Also, an automobile has a limited amount of energy available in its charging system to produce these power hungry bass frequencies. Therefore, an efficient amplifier that doesn’t waste energy as heat would be desirable.
Class D amplifiers are switching amps. Instead of producing power continuously like a traditional Class A or AB amplifier, a Class D amplifier switches on and off thousands of times a second and doesn’t waste energy (as heat) by being on when not needed.
Comparison of technologies at full power:
Class AB 500W amp at 50% efficiency will draw 1000W off the charging system.
1000W / 12.5V = 80 Amp draw
MMATS Class D 500W amp at 72% efficiency will draw 694W off the charging system.
694W / 12.5V = 56 Amp draw
1000W - 694W = 306W wasted as heat that should be driving your speakers!
SPECIFICATIONS
RMS Power at 13.8V
350W into 4 ohms with less than .1% THD+N
500W into 2 ohms with less than .1% THD+N
THD+N @ rated power: 0.05%
Frequency Response: <10 to 225Hz
Bass Boost: Variable 12db @ 45Hz
Lowpass Filter: Variable 12db, 70 to 200Hz
Dimensions (LxWxH): 8” x 9.25” x 2.25”
WARRANTY
3 years from date of manufacture when installed by an authorized MMATS Professional Audio dealer. Proof of purchase required.
**Manufacturers warranty is void on product purchased over the internet.