G e t s t a r t e d
For availability of approved enhancements, please check with your dealer. When you disconnect the power cord of any enhancement, grasp and pull the plug, not the cord.
■Charge the battery
This headset has an internal, nonremovable, rechargeable battery. Do not attempt to remove the battery from the device as you may damage the headset.
1.Connect the charger to a wall outlet.
2.Open the protective cap of the charger connector, and connect the charger cable to the headset.
The indicator light is yellow during charging. If the indicator light is not yellow, check the charger connection. If charging does not start, disconnect the charger, plug it in again, and retry.
Charging the battery fully may take up to 2 hours. When the battery is fully charged, the indicator light turns green.
3. Disconnect the charger from the headset and the wall outlet.
The fully charged battery has power for up to 8 hours of talktime, up to 200 hours of standby time, and up to 8 hours of music playing time. However, the times may vary when used with different mobile phones or other compatible Bluetooth devices, usage settings, usage styles, and environments.
When the battery is running out of power, the headset beeps every 20 seconds, and the indicator light flashes red. Recharge the battery.
■Switch the headset on or off
To switch on, press and hold the power key. The headset beeps, and the indicator light briefly flashes green. When the headset is connected to a paired phone and is ready for use, the indicator light flashes blue slowly.
To switch off, press and hold the power key. The headset beeps, and the indicator light briefly flashes red.
6