Removing a Battery Pack
To replace a discharged battery pack, follow these steps:
1.Save your work.
2.If you plan to resume working right away, press Fn + F3 to open the
3.Turn the computer’s power off.
4.Remove all cables connected to the computer and open the display panel.
5.Push up on two latches on the front of the palm rest until you feel them click.
6.Carefully slide out the palm rest about one centimeter (less than half an inch).
Figure 7-1 Unlatching the palm rest
7.Lift the palm rest up gently to expose the battery pack.
8.Pull up on the plastic tab at the right side of the battery pack to lift the battery pack up slightly. Be careful not to pull too hard or try to lift the battery pack more than about a finger’s width.
9.Grasp the battery pack and lift it out.
CAUTION
For environmental reasons, do not throw away a spent battery pack. Please return spent battery packs to your Toshiba dealer.
