indicate which is for the top connector (left button) and which is for the bottom connector (right button).
5.Close the cover.
6.Small flaps in the cover open for each card installed (upper and/or lower) if the card needs to be accessed by, for example, a communication line to a modem or Ethernet adapter. If you need to access the card, simply open the corresponding flap.
Figure 12-3 The card's slot cover
After installing the card, check the configuration in the T2150CD series computer’s TSETUP program to make sure it is appropriate for your card. Refer to the Card Manager User's Guide and to your card’s documentation for setup information.
Removing the PCMCIA Card
To remove the PCMCIA card, follow the steps below.
NOTE
Before you remove the PCMCIA card, make sure the computer is in boot mode.
1.Turn off the computer.
2.Open the slot cover.
3.Press the eject button for the card you want to remove. The card will pop out slightly.
4.Grasp the card and pull it out.
