the cord is frayed or damaged, replace it. If the terminals are soiled, wipe them with cotton or a clean cloth.
If the AC power cord still does not power the computer, contact your dealer.
Password
If you forgot your password, you can use your password service diskette to start the computer. If you did not make a password service diskette or if it doesn't work, see your dealer.
Problem | Procedure |
Cannot enter password | Refer to the Password security section in Chapter |
| 11, Setup and Password Security |
Hotkeys
Refer to Chapter 6, The Keyboard for information on using hotkeys. Make sure the operation is correct and try a few hotkey combinations.
Problem | Procedure |
Hotkeys do not work | If you are using an external keyboard, make sure |
| the Ext. Keyboard "Fn" key equivalent is set to the |
| combination you are using. |
| If you are still unable to use the hotkeys, consult |
| your dealer. |
Keyboard
Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 6, The Keyboard and Chapter 11, Setup and Password Security.
Problem | Procedure |
Some letter keys produce numbers | Check that the numeric keypad overlay is not |
| selected. Press Fn + F10 and try typing again. |
Alt, Ctrl or CapsLock do not work as expected
Check the TSETUP program to see whether the keyboard layout is set to normal or alternative layout.
Output to screen is garbled | Make sure the software you are using is not |
| remapping the keyboard. Remapping involves |
