DIAGNOSTICS MENU.

The diskettes must be write enabled. For 3 1/2” diskettes, the write-protect tab must be closed so you cannot see through it.

These disks must also be formatted. See Chapter 5, Disks and Drives, for more information on write enabling and formatting disks.

Press Enter when you’ve inserted the disk(s) in the drive(s). The test begins and displays:

FLOPPY DISK IN PROGRESS 503000

If there is an error, the ABORTED message appears. Write down the highlighted numbers and press Ctrl + Break to return to the DIAGNOSTICS MENU. If a disk drive fails, check the following:

Disks are properly formatted.

Disks are not damaged.

Try another disk and if there is still a problem, consult your dealer.

NOTE

If you change your mind and decide not to test a disk, press Ctrl + Break to return to the

Hard Disk Test

If the diskette test passes, and you selected to test the hard disk, you see the following message:

HARD DISK IN PROGRESS 805000

If this test aborts, write down any messages and consult your dealer. The computer or the drive may require service. Press Enter to return to the Diagnostics menu .

Printer Test

If the hard disk test passes and you selected to test the printer, you see the following message:

PRINTER TEST

IN PROGRESS

60xxxx

where xxxx is a counter that shows the test is still in progress.

If you specified an IBM compatible printer, the test prints six lines that show normal,

Page 142
Image 142
Toshiba T2150CD user manual Hard Disk Test, Printer Test