
Connecting 3 1/2" External Diskette Drive
To connect the drive, follow the steps below and refer to Figures
1.Plug the connecting cable’s larger connector into the 3 1/2” external diskette drive’s socket. Press the latches on either side of the connector when you plug in the connector.
NOTE
The connectors are designed so they cannot be misconnected.
Figure 3-3 Connecting the cable to the diskette drive
2.Pull down the cover to the computer’s 3 1/2” diskette drive port.
3.Press the latches on either side of the smaller connector and plug it into the diskette drive port.
Figure 3-4 Connecting the cable to the computer
NOTE