Toshiba T2150CD user manual Installing the Pcmcia Card, Opening the Pcmcia slot’s cover

SCSI adapter

Flash memory

Network adapter

Installing the PCMCIA Card

Two PCMCIA connectors are located one above the other on the left side of the computer. Both connectors are accessed from the same slot. You can install two Type II cards, one in each connector, or one Type III card in the bottom connector.

To install a PCMCIA card, follow the steps below.

NOTE

Before you install the PCMCIA card, make sure the computer is in boot mode.

1.Turn off the computer and set it so that the left side faces you.

2.Pull open the slot cover.

Figure 12-1 Opening the PCMCIA slot’s cover

3.Insert the PCMCIA card as shown in Figure 12-2. When the card is almost fully seated, you will feel some resistance. Press gently to assure a firm connection, but do not force the card into position.

Figure 12-2 Installing the PCMCIA card

4.When the card is fully seated, an eject button will pop out. Arrows on the buttons