1.System test
2.Memory test
3.Display test
4.Floppy Disk (Diskette) test
5.Hard disk test
6.Printer test
When a test is in progress, the program displays:
IN PROGRESS TTSSDSS
where TT indicates the test number, the first SS indicates the subtest number, D indicates the drive (if tested), and the second SS indicates the hardware status.
Subtests
The following gives details on each subtest:
System/Memory
The System and Memory tests run together for about one minute. The System test displays no messages. The Memory test displays the following message:
MEMORY TEST | IN PROGRESS XXXXXX |
where xxxxxx is the current memory location being tested. The memory test includes conventional and extended memory.
If either test aborts:
1.Write down everything that appears on screen.
2.Press Ctrl + Pause (Break) or Ctrl + C to return to the diagnostics menu.
3.Consult your dealer.
Display Tests (Character Attributes)
After the System/Memory tests end, the Display tests begin with the Character attributes screen.
Make sure the line under the message NEXT LINE SHOWS BLINKING DISPLAY is actually blinking.
After you press Enter, the test screen appears.
If your display does not match the test screen, write down the differences and contact
