MTX Audio TA92001 specification

• Smart-Engage™ Auto-Turn-On – An auto-turn-on circuit is included within the ampliﬁer. A remote turn-on wire is not necessary when connecting the ampliﬁer’s high level input to a high-powered source unit (car stereo). The ampliﬁer will automatically turn on when music is received through this type of connection. Note: Smart Engage™ is only active on the left input.

4.Input Sensitivity – The Input Sensitivity switch is used to set the proper input voltage range:

X1 POSITION: 100mV–1V (Typically for RCA Input)

X10 POSITION: 1V–10V (Typically for Speaker Level Input)

5.Gain Control – This feature is used to ﬁne-tune the input sensitivity of the ampliﬁer to the source unit’s output level.

6.Variable 40Hz-200Hz Low-Pass X-over with 24dB per octave Slope – This control allows the user to choose the exact low pass frequency range the ampliﬁer will play for the best possible performance. The upper crossover frequency point can be selected from 40Hz–200Hz at 24dB per octave.

7.Variable Subsonic Filter – This feature limits the lower end of the frequencies sent to the subwoofers. The subsonic feature includes a control knob used to adjust the subsonic setting from 15Hz-60Hz at 12dB per octave.

8.Parametric Equalizer – This one band parametric equalizer provides individual frequency, Q/bandwidth, and +/-12dB gain adjustment controls. Any frequency from 30Hz to 80Hz can be chosen and boosted or cut up to 12dB. The “Q” ranges from 0.5 to 4.0 in value allowing a wide variety of bandwidth adjustment to address the subtle tuning requirements common to mobile audio systems.

9.Remote Subwoofer Level Control (Remote Gain) – This port allows the use of the optional “remote level control”. The Remote Subwoofer Level Control is a bass control module that can be installed in any location within the vehicle for remote adjustments.

10.Phase Switch – The phase select switch allows you to invert the ampliﬁers output phase by 180 degrees to ensure the frequency interaction between the speakers is consistent within the vehicle. This also enables the advanced bridging operation when using two ampliﬁers on one speaker.

11.Processor Bypass – This feature routes the audio signal to around all enhancement features and crossover ﬁlters to achieve a purely ﬂat response for use with outboard processors.

12.StreetWires Connectors – All MTX ampliﬁers include StreetWires connectors for efﬁcient current and maximum voltage transfer.

13.Speaker Connection – Two sets of speaker terminals are provided for dual woofer applications. When connecting a single woofer, use only one set of speaker terminals (8 and 9 series are bridgeable with Phase Switch).

14.Power Terminals – This is the main power connection for the ampliﬁer. The power and ground wire size should be the same gauge.

•GND: The ground wire from this connection must be attached to bare metal on the vehicle. The distance to the ground should be as short as possible and no more than 18”.

•REM: To turn the ampliﬁer on/off, this terminal must be connected to the source unit’s “remote or electric antenna” wire.

•+12V: The power wire from this connection must be attached to the positive side of the vehicle battery.

•CAP+: Capacitor Positive Input - The ideal connection point for the positive sides of the capacitor to increase the ampliﬁer’s performance.

•CAP-: Capacitor Negative Input - The ideal connection point for the negative side of the capacitor to increase the ampliﬁer’s performance.

TA92001 specifications

MTX Audio is a renowned name in the automotive audio industry, known for its high-quality products that deliver powerful sound performance. One of the standout products in their lineup is the MTX Audio TA92001, a testament to the brand's commitment to excellence in sound amplification.

The TA92001 is a Mono Class D amplifier, specifically designed to provide robust power output for subwoofers, making it an ideal choice for those seeking to enhance their vehicle's audio experience. With an impressive 2000 watts of peak power handling and a 1000 watts RMS at 1 ohm, the TA92001 delivers the muscle needed to drive even the most demanding subwoofers, offering an exhilarating bass response that will satisfy any audiophile.

One of the key features of the MTX Audio TA92001 is its advanced Class D technology. This allows the amplifier to maintain high efficiency while producing minimal heat, which is essential for optimal performance in the confined spaces of a vehicle. The efficient operation not only prolongs the lifespan of the amplifier but also ensures that more power is dedicated to audio output rather than wasted as heat.

The amplifier incorporates a variable low-pass filter, adjustable from 40Hz to 180Hz, which enables users to fine-tune their sound to match their subwoofer specifications and personal preferences. This level of customization allows for enhanced clarity and accuracy in bass reproduction, ensuring that low frequencies resonate perfectly without overwhelming the rest of the audio spectrum.

Additionally, the TA92001 features a bass boost function, allowing users to increase low-frequency output by up to 12dB at 45Hz. This can be particularly beneficial for those who enjoy a more pronounced bass response, giving a deeper impact during music playback or while enjoying modern soundtracks.

Built with durability in mind, the TA92001 has a compact design with a robust metal chassis that can withstand the rigors of the road. It is equipped with fully protected circuitry, including short circuit and overheating protection, ensuring reliable performance even in the most challenging conditions.

Installation is made easier thanks to the inclusion of an easy-to-read LED status indicator, signaling when the amplifier is powered on or if there is a fault, simplifying troubleshooting during setup. Overall, the MTX Audio TA92001 amplifier embodies a powerful, efficient, and customizable solution for car audio enthusiasts looking to elevate their sound system experience.