Kenwood DPF-R4010 Introduction Before applying power, Safety precautions, AC voltage selection

Page 2

 

Introduction

 

 

2

Before applying power

CD-206/204/203/DPF-R6010/R4010/R3010 (En)

Caution : Read this section carefully to ensure safe operation.

 

 

 

 

 

 

Units are designed for operation as follows.

U.S.A. and Canada

AC 120 V only

Australia

AC 240 V only

U.K. and Europe

............................................................. AC 230 V only

China

AC 220 V only

*Other countries

......................... AC 110-120 / 220-240 V switchable

*AC voltage selection

The AC voltage selector switch on the rear panel is set to the voltage that prevails in the area to which the unit is shipped. Before connecting the power cord to your AC outlet, make sure that the setting position of this switch matches your line voltage. If not, it must be set to your voltage in accordance with the following direction.

Note:

Our warranty does not cover damage caused by excessive line voltage due to improper setting of the AC voltage selector switch.

AC voltage selector switch

 

 

 

The illustration shows

AC110-220V

AC220-240V

the CD-206/DPF-R6010.

LINE OUTPUT

SYSTEM CONTROL

DIGITAL OUTPUT

 

VARIABLE

Ä

COAXIAL OPTICAL

 

L

 

 

 

 

SL16 XS 8

 

 

R

 

 

 

AC110-220V AC220-240V

 

TEXT

 

 

 

 

Move switch lever to match your line voltage with a small screwdriver or other pointed tool.

For the United Kingdom

Factory fitted moulded mains plug

1.The mains plug contains a fuse. For replacement, use only a 13-Amp ASTA-approved (BS1362) fuse.

2.The fuse cover must be refitted when replacing the fuse in the moulded plug.

3.Do not cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or adapter, or consult your dealer.

If nonetheless the mains plug is cut off, remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply.

IMPORTANT

The wires in the mains lead are coloured in accordance with the following code:

Blue

: Neutral

 

Brown

: Live

 

Do not connect those leads to the earth terminal of a three-pin plug.

 

 

 

Safety precautions

Caution : Read this section carefully to ensure safe operation.

 

 

 

WARNING : TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAINOR MOISTURE.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THE LIGHTNING FLASH WITH ARROWHEAD SYMBOL, WITHIN AN EQUILATERAL TRIANGLE, IS INTENDED TO ALERT THE USER TO THE PRESENCE OF UNINSULATED “DANGEROUS VOLTAGE” WITHIN THE PRODUCT’S ENCLOSURE THAT MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS.

THE EXCLAMATION POINT WITHIN AN EQUILATERAL TRIANGLE IS INTENDED TO ALERT THE USER TO THE PRESENCE OF IMPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE.

REQUIREMENT BY NEDERLAND GAZETTE

Batteries are supplied with this product. When they empty, you should not throw away. Instead, hand them in as small chemical waste.

The marking of products using lasers (Except for some areas)

CLASS 1

LASER PRODUCT

The marking is located on the rear panel and says that the compo- nent uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit.

Page 1 Page 3
Image 2
Page 1 Page 3
Contents CD/DPF-R Series DTS disclaimer clauseMarking of products using lasers Except for some areas Introduction Before applying powerSafety precautions AC voltage selectionContents Connection to digital amplifier or MD CD-206/DPF-R6010 only System connectionsMalfunction of microcomputer To use the headphone Except for CD-203/DPF- R3010 Output -12dBSystem connections Controls and indicators About the Standby modeControls and indicators Illustration shows the RC-P0601 Loading batteriesOperation Close the tray Disc Reading D1 CD TextLoad/unload a disc Playing tracks in order from track No Normal play Track modeMode Start playback 123PGM01 Edit Rndm Title XYZ D1 01 Title ABCD1 02 Title XYZ Display scrollingArranger Abcd Disc Title ABAbcdef Selecting the text information display Text DisplayPGM01 D1 TNO.?? Programmed play PGM modePGM01 DISC? PGM01 D1 TNO.25To stop playback Programmed play PGM modePGM01 D5 TNO.25 To add a track to the programTime display on CD player Time Disp To clear tracks from the programAuto space function Preparation Playback in a random order Random playbackRndm Ing oneTo repeat only the programmed tracks Repeated playbackRepeat on Repeat OFF PGM01 \Repeat Edit DISC? EditingNormal Edit Edit DISC3 C-46Start recording Press so that the Multi Edit indicator lightEditing Repeat ,4 aboveTo clear the edited contents To check the edited contentsPlaying or recording the edited contents Edit aSet the timer on time Timer operationsSet the amplifier volume PreparationMaintenance DiscCase of difficulty Operation to resetRemote control unit CD player unitVariable CD-204/DPF-R4010 SpecificationsSignal to noise ratio Headphone output MaxCD-206/204/203/DPF-R6010/R4010/R3010 En For your records

DPF-R4010, DPF-R6010, DPF-R3010 specifications

Kenwood, a well-recognized name in audio and home entertainment equipment, has expanded its portfolio with several high-quality digital photo frames, namely the DPF-R3010, DPF-R6010, and DPF-R4010. Each of these models combines stylish design with modern technology, providing users with an engaging way to display their cherished memories.

The Kenwood DPF-R3010 is an entry-level model equipped with a 10.1-inch display that boasts a resolution of 1024 x 600 pixels. This frame is perfect for those who want an easy-to-use device for showcasing photos. It supports various image formats, including JPEG and BMP, and features a built-in memory of 4GB, allowing for a substantial number of photos. Users can connect via USB or SD card, making it versatile for transferring images. The DPF-R3010 also includes an adjustable brightness feature, ensuring that images are clear and vibrant in any lighting condition.

Stepping up in the lineup, the Kenwood DPF-R4010 offers a more expansive display at 12 inches, featuring an impressive resolution of 1280 x 800 pixels. This enhanced display quality makes it ideal for showcasing high-resolution photographs. The DPF-R4010 also comes with a variety of slideshow options, allowing users to customize how their photos are presented. It supports both USB and SD card connections, as well as a dedicated remote control for added convenience. With its sleek design, the DPF-R4010 fits seamlessly into any home décor.

The Kenwood DPF-R6010 represents the pinnacle of this series with its 15-inch display and a high resolution of 1920 x 1080 pixels. This model is designed not only for photo display but also for video playback, adding a dynamic element to any slideshow. The DPF-R6010 boasts Wi-Fi connectivity, allowing users to stream images directly from their smartphones or social media accounts. With advanced features such as motion sensors, this frame automatically wakes up when someone enters the room, ensuring that every moment is showcased without manual effort.

All three models share standard features such as calendars and clocks, making them multifunctional devices. With their elegant aesthetics and modern technology, the Kenwood DPF series offers a compelling way to keep memories alive, whether you're choosing the economical DPF-R3010, the versatile DPF-R4010, or the feature-rich DPF-R6010. Each model is designed to cater to a range of user needs while ensuring photo display is both an art and a joy.
Top Page Image Contents