Before Starting, Installation Mounting | MTX Audio TA5601 specification

5.Gain Control – This feature is used to ﬁne-tune the input sensitivity of the ampliﬁer to the source unit’s output level.

6.Low-Pass X-over Frequency Control with 24dB per octave Slope – This control allows the user to choose the exact low-pass frequency range the ampliﬁer will play for the best possible performance. The upper end of the crossover frequency point can be selected from 40Hz–200Hz at 24dB per octave.

7.Fixed Subsonic Filter – This feature limits frequencies from 30Hz at 12dB per octave and below to be sent to the subwoofers. The subsonic feature includes a selectable on/off switch.

8.Quasi Parametric Equalizer - This one band equalizer provides individual frequency and -/+ 12dB gain adjustment controls. Any frequency from 30Hz to 80Hz can be chosen and boosted or cut up to 12dB.

9.Remote Subwoofer Level Control (Remote Gain) – This port allows the use of the optional “remote level control”. The Remote Subwoofer Control is a bass control module that can be installed in any location within the vehicle for remote adjustments.

10.StreetWires Connectors – All MTX ampliﬁers include StreetWires connectors for efﬁcient current and maximum voltage transfer.

11.Speaker Connection – Two sets of speaker terminals are provided for dual woofer applications. When connecting a single woofer, use only one set of speaker terminals.

12.Power Terminals – This is the main power connection for the ampliﬁer. The power and ground wire size should be the same gauge.

•GND – The ground wire from this connection must be attached to bare metal on the vehicle. The distance to the ground should be as short as possible and no more than 18”.

•REM – To turn the ampliﬁer on/off, this terminal must be connected to the source unit’s “remote or electric antenna” wire.

•+12V – The power wire from this connection must be attached to the positive side of the vehicle battery.

•CAP+ - Capacitor Positive Input - The ideal connection point for the positive side of the capacitor to increase the ampliﬁer’s performance.

•CAP- - Capacitor Negative Input - The ideal connection point for the negative side of the capacitor to increase the ampliﬁer’s performance.

Before Starting

MTX recommends that you have your new Thunder ampliﬁers installed by an authorized MTX retailer, preferably MECP certiﬁed. If you do decide to do it yourself, make sure you have read the instructions carefully and have

the following tools:
•	Electric drill	•	Phillips bit or screwdriver
•	1/8” bit	•	Wire cutters/crimpers
•	Safety glasses	•	X-Acto knife

Disconnect the vehicle’s negative battery connection. Any deviation from the recommended connection procedures may cause serious damage to the ampliﬁer, speakers, and/or vehicle electrical system. Please double check the connections before turning the system on.

Installation

Mounting

Place your Thunder ampliﬁer at the predetermined mounting location. Use a felt pen to mark the exact position of the mounting holes on the mounting surface. Set the ampliﬁer aside. With a sharp, precise blade cut small circles in the carpet and padding around the four marks denoting your mounting holes to expose the metal underneath. Use a center punch to make an indentation in the metal to ensure that you drill the exact position for the screws.

Note: Please use common sense and make sure that all vehicle wires, gas lines, brake lines, etc. are clear and will not interfere with the installation. ALWAYS WEAR PROPER SAFETY GLASSES.

TA5601 specifications

The MTX Audio TA5601 is a powerful monoblock amplifier designed to deliver high-performance audio for car audio enthusiasts. Renowned for its robust build quality and advanced technological features, the TA5601 stands out in the competitive world of automotive sound systems.

At the core of the TA5601 is its impressive power output. With a peak power of 5,600 watts, this amplifier can drive even the most demanding subwoofers, providing deep bass and clear audio reproduction. It is ideal for users looking to boost their vehicle's sound system to new levels of performance. The RMS power output of 1,600 watts at 1 ohm ensures consistent performance even during extended play periods, making it reliable and efficient.

The TA5601 features MTX's advanced Class D technology, which allows for improved energy efficiency and reduced heat generation. This design enables higher power output without the bulk and heat typically associated with traditional amplifiers. Additionally, the compact size of this amplifier allows for flexible installation options, making it easier to integrate into various car audio systems.

Another notable feature of the MTX Audio TA5601 is its built-in adjustable low-pass filter. This filter allows users to tailor the frequency response to their specific audio preferences, ensuring that they can filter out unwanted frequencies and achieve optimal sound quality. The amplifier also includes a bass boost feature, which allows for additional adjustment of low frequencies, enhancing the overall subwoofer performance.

MTX Audio places a strong emphasis on durability; the TA5601 is constructed with high-quality components designed to withstand the rigors of automotive environments. Its design incorporates extensive protection circuitry, safeguarding against overheating, short circuits, and other potential failures, which ensures longevity even under intense usage.

The sleek design of the TA5601, featuring an attractive finish and thoughtful layout, not only complements modern automotive interiors but also provides practical accessibility for adjustments and connections.

In summary, the MTX Audio TA5601 is a formidable amplifier that combines robust power, efficiency, and customizable features, making it an excellent choice for those seeking to elevate their car audio experience. Its solid construction and advanced technologies further enhance its reputation in the realm of automotive sound amplification.