Sears 917.257651 iNSTALL MULCHER PLATE See Figs.7A & 7B, To Convert To Bagging Or Discharging

,IH,I linil- i,,,ll H i , i

iNSTALL MULCHER PLATE (See Figs.7A & 7B)

oinstall two latch hooks to mulcher plate using screw, washer, lock washer, and weld nut as shown.

NOTE: Pre-assemb[e weld nut to latch hook by inserting weld nut from the top with hook pointing down

•Tighten hardware securely.

°Raise and hold deflector shield in upright position.

•Place front of mulcher plate over front of mower deck opening and slide into place, as shown.

oHook front latch into hole on front of mower deck. - Hook rear'latch into hole on back of mower deck

ill,mlll,ii iill! !llHi ,

CAUTION: Do not remove discharge guard from mower'. Raise and hold

guard when attaching mulcher plate and allow it to rest on plate while in operation.

TO CONVERT TO BAGGING OR

DISCHARGING

Simply remove mulcher plate and store in a safe place. Your'mower is now ready for'discharging or installation of optional grass catcher'accessory,,

			HOOK	POINTS
	WELD	NUT	DOWN
	FROM	THE
	LOCK
WELD
NUT _	WASHER
		SCREW
LATCH
HOOK			_'LATCH
				HOOK
			LOCK	WELD
WASHER				NUT
			I WASHER

WASHER

MULCHER

LATCH

FIG. 7B

/CHECKLIST

BEFORE YOU OPERATE AND ENJOY YOUR NEW TRACTOR, WE WISH TO ASSURE THAT YOU RECEIVE THE BEST PERFORMANCEAND SA TtSFACTION FROM THIS QUALITY PRODUCT.

PLEASE REVIEW THE FOLLOWING CHECKLIST:

/All assembly instructions have been completed..

/No remaining loose parts in carton,

/Battery is properly prepared and charged, (Minimum

1hour at 6 arnps).

/Seat is adjusted comfortably and tightened securely°

v" All tires are properly inflated. (For shipping purposes, the tires were ovefinflated at the factory).

¢" Be sure mower deck is properly leveled side-to-side/ front-to-rear for best cutting results. (Tires must be properly inflated for leveling)

/Check mower and drive belts. Be sure they are routed properly around pulleys and inside all belt keepers..

/Check wiring. See that all connections are stilt secure and wires are properly clamped,

WHILE LEARNING HOW TO USE YOUR TRACTOR, PAY EXTRA A TTENTION TO THE FOLLOWING IMPORTANT

PLATE

_'_'_'_SCREW

FIG. 7A

ITEMS:

v" Engine oil is at proper level..

,/" Fuel tank is filled with fresh, clean, regular unieaded gasoline.

v" Become familiar with all controls - their location and function. Operate them before you start the engine.

v" Be sure brake system is in safe operating condition.

10