Metra Electronics 99-8714 installation instructions Smart Fortwo

Page 3

99-8714 DASH DISASSEMBLY

SMART FORTWO 2008

A

1Disconnect the negative battery terminal to prevent an accidental short circuit.

2Unclip the Hazard button switch panel. (Figure A)

3Remove (1) T-20 Torx head screw.

(Figure B)

4Carefully unclip the panel surrounding the radio, start at the top of the dash and work your way down. (Figure C)

5Remove (4) T-20 Torx head screws from around the radio. (Figure D)

6Disconnect the wire harness and antenna and remove radio.

B

Continue to kit assembly.

DC

1

Image 3
Contents 99-8714 Dash Disassembly Smart Fortwo DIN Radio Provision with Pocket Stacked DIN Units Provision Final Assembly 99-8714 Instructions