Weider manual Part Identification ChartÑModel No. WEBE29300 R0800A

Part Identification ChartÑModel No. WEBE29300 R0800A

Refer to the drawings below to identify small parts used in assembly. The number in parentheses below each drawing is the key number of the part, from the Part List in the center of this manual. The number following the key number is the quantity needed for assembly. Note: Some small parts may have been pre-attached. If a part is not in the parts bag, check to see if it has been pre-attached.

M10 Large Washer (58)Ð6

M6 x 16mm Screw (61)Ð6

M8 x 16mm Screw (50)Ð2

M10 x 20mm Bolt (26)Ð2

M8 x 25mm Bolt (53)Ð2

M10 x 30mm Bolt (38)Ð2

M10 x 45mm Bolt (40)Ð3

M8 x 55mm Bolt (70)Ð1

M6 Washer (81)Ð4

M8 Flat Washer (67)Ð2

M10 Small

Washer (6)Ð18

M8 Nylon Locknut	M10 Nylon Locknut
	(11)Ð46
(54)Ð4

M10 x 80mm Bolt (41)Ð24
M10 x 75mm Bolt (39)Ð2	(76)Ð1
M10 x 70mm Bolt (85)Ð1	180mm Bolt
	M10 x

M8 x 70mm Bolt (30)Ð1

M10 x 65mm Bolt (56)Ð9

M6 x 65mm Screw (62)Ð4

M10 x 60mm Carriage Bolt (64)Ð2

5