6.Press a 38mm Bushing (29) into each end of the Right Weight Glider (31). Slide the Right Weight Glider onto the indicated end of the Barbell (35) and attach it to the Barbell using an M8 x 16mm Screw (50). Do not tighten the Screw yet. Make sure the Right Weight Glider is oriented exactly as shown.
7.Press a 38mm Bushing (29) into each end of the Left Weight Glider (32). Slide the Left Weight Glider onto the indicated end of the Barbell (35) and secure it to the Barbell using an M8 x 16mm Screw (50). Do not tighten the Screw yet. Make sure the Left Weight Glider is oriented exactly as shown.
8.Press a 50mm Bushing (47) into the indicated end of a Weight Adapter (33). Slide the Weight Adapter onto the Barbell (35) and secure it to the Barbell using a Large Washer (44) and an M10 x 25mm Bolt (43).
Attach the other Weight Adapter (33) to the other end of the Barbell (35) in the same manner.
Tighten the M8 x 16mm Screws (50) used in steps 6 and 7.
9.Note: This step requires the help of a second person.
Slide the Right Safety Spotter (23) and the Left Safety Spotter (24) onto the Weight Guides (18).
Make sure the Safety Spotters are oriented exactly as shown.
Slide the assembled Locking Bar (34) and the Right and Left Weight Gliders (31, 32) onto the Weight Guides (18). Make sure the Locking Bar and
Weight Gliders are oriented exactly as shown.
8
6 |
|
|
| 50 |
|
29 |
|
|
31 | 29 |
|
|
| |
| 35 |
|
7 |
|
|
| 35 |
|
| 29 | 32 |
|
| |
|
| 50 |
|
| 29 |
8 |
|
|
| 35 |
|
| 33 |
|
|
| 47 |
|
| 44 |
|
| 43 |
9 |
|
|
31 | 34 |
|
|
| |
23 |
|
|
| 32 |
|
18 | 24 |
|
| 18 |
|
