99-8225G KIT ASSEMBLY
ISO DIN HEAD UNIT PROVISION WITH POCKET
*Note: Refer also to the instructions included with the aftermarket radio.
1Secure the Radio Housing into the factory a/c vent panel using the factory hardware. (Figure A)
2Mount the ISO Brackets to the head unit with the screws supplied with the unit. (Figure B)
3Slide the head unit into the radio opening until the side clips engage.
(Figure C)
4Snap the Trim Plate into the Radio Housing. (Figure C)
5Snap the factory vent panel/Radio Housing over dash cavity. (Figure D)
6Reassemble remaining radio and dash assemblies in reverse order of disassembly.
A
REAR VIEW - A/C VENT PANEL
B
D
C
3