Metra Electronics 95-7951 installation instructions Stacked ISO Mount Units Provision, Figure F

Page 7

95-7951 KIT ASSEMBLY

STACKED ISO MOUNT UNITS PROVISION

*Note: Refer also to the instructions included with the aftermarket radio.

NOTE: For the Chevrolet Aveo 2004-06, Chevrolet Aveo Hatchback 2007, Pontiac G3 Hatchback 2007 and Suzuki Verona 2004-07, cut and remove front lower mount- ing tabs from the Double DIN trim plate (Figure A). For the Suzuki Forenza 2004-07 and the Suzuki Reno 2005-07, cut the rear lower mounting tabs (Figure B).

NOTE: The Verona 2004-2007 sub dash will need to be trimmed slightly for proper fit. Refer to illustration.

(Figure C,D)

1Snap the Double DIN brackets to the out- side edge of the Double DIN trim plate.

(Figure E)

2Slide the stacked ISO units into the brack- et/trim plate assembly and secure the units to the assembly using the screws supplied with the units.e

(Figure F)

A

B

Continue to final assembly.

C D

CUT

HERE

ONBOTHSIDES

E F

5

Image 7
Contents 95-7951 Dash Disassembly Table of ContentsDash Disassembly Suzuki Reno Suzuki ForenzaSuzuki Verona Double DIN Mount Radio Provision KIT AssemblyFigure F Stacked ISO Mount Units ProvisionFinal Wiring Connections Final Assembly
Related manuals
Manual 12 pages 24.52 Kb