Metra Electronics 95-7867 installation instructions KIT Assembly, Double DIN Radio Provision

95-7867 KIT ASSEMBLY

	DOUBLE DIN RADIO PROVISION
	STACKED ISO MOUNT UNITS PROVISION
	*Note: Refer also to the instructions included with the aftermarket radio.
		A
1	Mount the hazard switch to the back of
	the Double DIN Trim Plate using the
	factory hardware. (Removed in step 7
	of dash disassembly) (Figure A)
2	Mount the bracket assembly (Removed
	in step 6 of dash disassembly) to the
	back of the Double DIN Trim Plate
	using the factory hardware. (Figure B)
3	Slide the Double DIN radio or stacked
	ISO mount units into the bracket/radio	B
	housing assembly and secure to the
	assembly using the screws supplied
	with the Double DIN head radio or
	stacked ISO mount units. (Figure C)
	Continue to final assembly.

C

2