99-1005 KIT ASSEMBLY
DIN RADIO WITH POCKET PROVISION
*Note: Refer also to the instructions included with the aftermarket radio.
1Mount the pocket to the back of the radio housing using (2) of the screws supplied with the kit. (Figure A)
2Mount the rear support bracket to the back of the pocket using the remaining
(2) screws supplied with the kit.
(Figure A)
•Spectra only skip to final assembly.
3Slide the DIN cage into the Radio Housing and secure by bending the metal locking tabs outward. (Figure B)
4Slide the aftermarket radio into the cage until it snaps into place. (Figure C)
A
B
Continue to final assembly.
C
3