ASSEMBLY
TO REMOVE UNIT FROM CARTON
1.Cut off top of carton.
2.Remove front and rear inserts and literature pack.
3.Cut out back of carton and roll unit out.
4.Remove protective packaging materials.
1 | 2 | 3 |
1.Mower Unit
2.Discharge Chute
3.Grass Bag
4.Grass Bag Frame
5.Literature Pack
6.Battery Charger (electric start models)
OM0340
5
LiteraturePack
OM0320
OM0311
OM0350 6
4
OM0560
OM0330
Figure 4
ASSEMBLY
1.Unfold and adjust handlebar.
2.Self propelled units: The Speed Selector rod is shipped on the handlebar with hardware in position. Remove hair pin, insert bent end of rod through hole in swivel of speed control bell crank, and retain with hair pin (Figure 5).
3.Assemble grass bag onto bag frame.
4.Configure mower for bagging, side discharge or mulching. See Mower Configurations in Operation Section.
5.Fully charge battery (electric start models). See Service & Adjustments.
6.Check the Engine/Blade Control feature. Engine and blade must stop within 3 seconds whenever control handlebar is released.
7.Fill fuel tank. See Operation Section.
1
3
2
OM0300
1.Speed Selector Rod
2.Hair pin
3.Speed Control Bell Crank
Self propelled units
Figure 5
GB - 9
