1 | 1 | 4 |
|
|
4
2
2
3 | 3 | OM0550 |
OM0570 | ||
Briggs & Stratton Intek OHV |
| Robin |
|
| |
1. Oil Fill Cap & Dipstick | 4. | Fuel Cap & Tank |
2.Air Cleaner
3.Spark Plug & Wire
Figure 13
CHECK ENGINE COOLING
Engine is air cooled. Air must circulate freely around engine from Air Intake to cooling fins on cylinder head and block to prevent overheating.
WARNING: HOT SURFACES can cause death or serious injury. DO NOT TOUCH parts which are hot from operation. ALWAYS allow parts to cool.
Every 100 hours of operation or yearly (more often if conditions require) remove cooling shrouds and clean cooling fins. Clean external surfaces of engine of dust, dirt and oil deposits which can contribute to improper cooling.
IMPORTANT: DO NOT operate engine with blower housing removed or engine overheating damage will result.
CHECK MUFFLER
Check muffler for cracks, wear, or other damage. Worn out mufflers should be replaced immediately. Continued use could result in fire or explosion.
GB - 17