Metra Electronics 95-7326 installation instructions KIT Assembly, Double DIN Radio Provision

Page 4

95-7326 KIT ASSEMBLY

DOUBLE DIN RADIO PROVISION

*Note: Refer also to the instructions included with the aftermarket radio.

A

1Cut and remove the bar in the factory radio trim panel. (Figure A)

TIP: The smoother the cut, the better the 95-7326 will look in the dash panel.

2Snap the Double DIN brackets to the inside edge of the Double DIN trim

plate. (Figure B)

3 Slide the Double DIN radio into the

 

bracket/trim plate assembly and

B

secure the radio to the assembly using

the screws supplied with the radio.

 

(Figure C)

 

CUT OUT BAR

CUT HERE

Continue to final assembly.

C

2

Image 4
Contents 95-7326 Dash Disassembly Dash Disassembly Hyundai ElantraKIT Assembly Double DIN Radio ProvisionStacked ISO Mount Units Provision Final Assembly Final Assembly95-7326 Instructions