Stacked ISO Mount Units Provision

*Note: Refer also to the instructions included with the aftermarket radio.

1Cut and remove the bar in the factory radio trim panel. (Figure A)

TIP: The smoother the cut, the better the 95-7326 will look in the dash panel.

2Snap the Double DIN brackets to the

inside edge of the Double DIN trim plate. (Figure B)

3 Slide the stacked ISO units into the
bracket/trim plate assembly and	B
secure the units to the assembly using	B
the screws supplied with the units.
(Figure C)

CUT OUT BAR

CUT HERE

Continue to final assembly.

STACKED ISO MOUNT UNITS PROVISION