Onkyo CR-525UKD, CR-325UKD, CR-425UKD Connecting Antennas, Connecting the AM Loop Antenna

Page 17

Connecting Antennas

This section explains how to connect the supplied indoor FM antenna, AM loop antenna, and DAB antenna, and how to connect commercially available outdoor FM and AM antennas.

The CD receiver won’t pick up any radio signals without an antenna connected, so you must connect the antenna to use the tuner.

AM ANTENNA push terminals

FM ANTENNA jack

Connecting the AM Loop Antenna

The supplied indoor AM loop antenna is for indoor use only.

1 Assemble the AM loop antenna, inserting the tabs into the base, as shown.

DAB antenna jack

Connecting the Indoor FM Antenna

The supplied indoor FM antenna is for indoor use only.

1 Attach the FM antenna, as shown.

2 Connect both wires of the AM loop antenna to the AM ANTENNA push termi- nals, as shown.

(The antenna’s wires are not polarity sensitive, so they can be connected either way around). Make sure that the wires are attached securely and that the push terminals are gripping the bare wires, not the insulation.

Insert the plug fully into the jack.

Once the CD receiver is ready for use, you’ll need to tune into an FM radio station and adjust the position of the FM antenna to achieve the best possible reception.

2 Use thumbtacks or something similar to fix the FM antenna into position.

Thumbtacks, etc.

Caution:

Be careful that you don’t injure yourself when using thumbtacks.

If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available out- door FM antenna instead (see page 18).

Push

Insert wire

Release

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Once the CD receiver is ready for use, you’ll need to tune into an AM radio station and adjust the position of the AM antenna to achieve the best possible reception.

Keep the antenna as far away as possible from the CD receiver, TV, speaker cables, and power cords.

If you cannot achieve good reception with the supplied indoor AM loop antenna, try using it with a commer- cially available outdoor AM antenna (see page 18).

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents CR-525UKD CR-425UKD CR-325UKD Avis Important Safety InstructionsInstalling this Unit PrecautionsPower Brown Live PrecautionsSupplied Accessories FeaturesAmplifier CD PlayerUsing the Remote Controller Before Using the CD receiverInstalling the Batteries Contents CR-525UKD CR-425UKD/CR-325UKD Getting to Know the CD receiverFront Panel Getting to Know the CD receiver Display Rear Panel RC-721S CR-525UKD RC-660S CR-425UKD/CR-325UKD Remote ControllerPrevious/Next 7/6 PRESET/PRESET r buttons 29 Timer button 24, 52, 53, 55Volume q/w buttons 25 STANDBY/ON button 25, 53Example Shows the case of h YES/MODE/SHUFFLE button Controlling an Onkyo MD recorder, cassette deck, or RI DockSupported Discs Disc NotesCD-R/RW Compatibility Discs Made on Personal ComputersCleaning Discs Disc Content OrganizationDisc Notes Handling DiscsConnecting the Indoor FM Antenna Connecting AntennasConnecting the AM Loop Antenna Connecting the DAB Antenna Connecting AntennasConnecting an Outdoor FM Antenna Connecting an Outdoor AM AntennaTerminal posts Connecting SpeakersConnecting Your Speakers Connecting a Subwoofer Connecting Other ComponentsAbout Connections Connection Color CodingWhat can you do with u? Connecting Other ComponentsConnecting an Onkyo Cassette Deck Connecting an Onkyo MD recorder Plug the power cord into a suitable wall outlet Connecting the Power CordConnecting an Onkyo RI Dock Remote Interactive Dock Turning Off the AccuClock Function First Time SetupSetting the Clock with the AccuClock Function Using Headphones Adjusting the VolumeBasic Operations Turning On the CD receiverUsing the Super Bass Function Adjusting the Bass and TrebleUsing the Direct Function Basic OperationsInput Source Name Abbreviations Changing the Input DisplaySelecting Tracks Playing CDsDisplaying CD Information Playing CDsRemain Total RemainSelecting/Playing MP3 Files Selecting MP3 Files in Navigation ModeWhile playback is stopped, press the Folder button To start playback, press the Enter or Play 1 buttonSelecting MP3 Files in All Folder Mode Playing the MP3 Files in Only One Folder Displaying MP3 InformationMemory Playback Repeat Playback Random PlaybackPreferences Setting MP3 PreferencesFolder Key? Disable EnableSupported Audio File Formats Using USB interface CR-525UKD onlyUSB Mass Storage Device Requirements USB Mass Storage Device Folders and FilesPlaying Music Files on a USB Mass Storage Device Using USB interface CR-525UKDonlySelecting Music files Selecting Music files in other foldersResume Playback Cancelling Resume PlaybackRandom Playback Select the type of Repeat PlaybackDisplaying Music File Information Listening to the Radio Tuning into AM/FM Radio StationsAdjusting the Antennas Listening to the Radio What is RDS?Displaying AM/FM Radio Information Receiving RDSListening to DAB Digital Radio Using the Auto Tuning Function ManuallySelecting DAB for the Very First Time Press the Band button repeat- edly to select DABDisplaying DAB Radio Information Selecting DAB StationsDAB Setup After Storing Presets You Can Presetting FM Stations Automatically Auto PresetAbout Presets Presetting AM/FM/DAB Stations ManuallySelecting Preset Stations Available Characters Naming PresetsCopying Presets To erase the preset, press Enter Erasing a Preset’s Name Erasing PresetsSetting AccuClock to Use a Specific Station Setting the ClockSetting the Clock Manually Setting the ClockUsing the 12- or 24-hour Format Displaying the Time in Standby ModeAbout the Timers Using the TimersProgramming the Timers Using the TimersEdly to select Timer 1, 2, 3, or Then press EnterIf you selected Once, use Timer indicator 1, 2, 3, or 4 willIf you selected Every, use If you selected Days Set, useChecking Timer Settings Turning Timers On and OffAll of the timer’s settings Press Enter repeatedly to seeChecking the Remaining Sleep Time Using the Sleep TimerCanceling the Sleep Timer Troubleshooting Troubleshooting Clock Time is not displayed in Standby mode Timers Timer playback or recording doesn’t workCan’t play MP3 files Can’t play WMA filesGeneral SpecificationsAmplifier Section Tuner SectionMemo 3 4 4 7 1

CR-425UKD, CR-325UKD, CR-525UKD specifications

The Onkyo CR-525UKD, CR-325UKD, and CR-425UKD are a series of compact, feature-rich audio systems designed to deliver high-quality sound in a user-friendly format. These systems cater to audiophiles and casual listeners alike, providing a blend of modern technology and classic charm.

The CR-525UKD is the flagship model in the series, offering a robust 40 watts per channel amplification. It features a sleek design with a clear display, making it easy to navigate through media options. One of its standout features is the inclusion of a built-in DAB/DAB+ tuner, allowing users to access an array of digital radio stations with superior sound quality. The CR-525UKD is also equipped with Bluetooth technology, enabling wireless streaming from smartphones and tablets. The system supports multiple audio formats, including MP3, FLAC, and WAV, ensuring versatility for different listening preferences.

In contrast, the CR-325UKD is designed for listeners who want excellent performance in a more compact and budget-friendly package. It delivers 30 watts per channel and comes with a DAB tuner. The simplified controls make it particularly user-friendly, appealing to those who might not be tech-savvy. Despite its lower power, the sound quality remains impressive, capturing detailed audio for a more immersive experience. The CR-325UKD also offers a USB port for playback from external storage devices, adding to its convenience.

The CR-425UKD sits comfortably in between the two, offering 35 watts per channel. This model boasts a slightly more comprehensive feature set than the CR-325UKD, incorporating both DAB and FM tuners, along with Bluetooth capabilities. The CR-425UKD also provides a user-friendly interface and a variety of connectivity options, including an Aux input and headphone jack, making it an excellent choice for versatile audio setups.

All three models share essential characteristics such as an elegant design, user-friendly interfaces, and high-quality audio performance. They cater to various needs, from casual listening to more dedicated setups. With their solid construction and impressive sound quality, the Onkyo CR-525UKD, CR-325UKD, and CR-425UKD represent excellent choices for those seeking an enriched audio experience in a compact format. These systems embody Onkyo's commitment to delivering outstanding performance and innovative features in home audio.
Top Page Image Contents