Onkyo CR-425UKD, CR-325UKD Setting the Clock, Setting AccuClock to Use a Specific Station

1

Press the [TIMER] button.

5

When you’ve selected the station,

“Clock” appears on the display.

press [ENTER].

Remote

While the clock is being set, “Wait”

controller If the clock has already been set, a timer

flashes on the display. It may take a few

option appears instead, in which case

minutes to set the clock. When the clock

you’ll need to press the [TIMER] button

has been set, the message “Clock

repeatedly until “Clock” appears.

Adjusted” scrolls across the display, then

the day and time are displayed for a

2

Press [ENTER].

while.

“AccuClock”or “*AccuClock*” appears

Notes:

on the display.

• If the clock is not set correctly, specify

If “ManualAdjust” appears, use the Pre-

another FM station and try again or set

vious and Next [7]/[6] buttons to

the clock manually (see page 53).

• The AccuClock function automatically

select “AccuClock” or “*AccuClock*”.

updates the clock every day. If you don’t

3

Press [ENTER].

want it to, you can turn off the Accu-

The frequency flashes on the display.

Clock function (see page 24).

4

Use the Rewind and Fast Forward

[5]/[4] buttons to tune into

the FM station.