Onkyo CR-515 CR-315 Basic Operation, Adjusting the Bass and Treble, Using the Super Bass Function

Basic Operation—Continued

/	TONE
	ENTER

S.BASS MUTING

Adjusting the Bass and Treble

1	Press the [TONE] button to select
	Bass.
2	Use the Previous and Next
	[	]/[	] buttons to adjust the
	bass.
	The default setting is “±0.” You can
	adjust the bass and treble from –3 to +3.
	Press [ENTER], and then use the
	Previous and Next [			]/[	] but-

tons to adjust the treble.

Notes:

•If you press no buttons for 8 seconds, the previous display will appear auto- matically.

•If you press the [TONE] button while the Direct function is on, the Direct function will be turned off.

On the CR-515, you can also use the [TONE] button and multi control on the front panel to adjust the bass and treble.

Using the Super Bass Function

To turn on the Super Bass function, press the [S.BASS] button.

The S.BASS indicator lights up.

To turn off the Super Bass function, press the [S.BASS] button again.

On the CR-515, you can also use the [TONE] button on the front panel. Press the [TONE] button for 3 seconds to turn on the Super Bass function.

Note:

If you press the [S.BASS] button while the Direct func- tion is on, the Direct function will be turned off.

CR-515

DIRECT TONE

CR-315

DIRECT

Using the Direct Function

To turn the Direct function on or off, press the [DIRECT] button on the CD receiver.

When the Direct function is off, the tone controls can be used to adjust the sound.

When the Direct function is on, the tone controls are bypassed, so you can enjoy a

pure sound, and the DIRECT indicator lights up.

DIRECT indicator

On the remote controller, press the [TONE] button for 3 seconds to turn on the Direct function.

On the CR-515, the [DIRECT] button’s indicator lights up when the Direct function is on.

Muting the Sound

To mute the output of the CD receiver, press the remote con- troller’s [MUTING] button. The MUTING indicator flashes on the display. On the CR-515, the volume control indicator flashes, too.

MUTING indicator

To unmute the CD receiver, press the [MUTING] button again.

Tips:

While the CD receiver is muted:

• Turning the [VOLUME] control on the CD receiver or pressing the VOLUME [ ]/[ ] buttons on the remote controller will unmute the CD receiver.

•If you turn the CD receiver off, the next time you turn it on, the CD receiver will be unmuted.

28