Trouble Shooting

NO SOUND	Is the LED lit?
	YES

Check Power and Remote turn-on wire for voltage. Make sure Ground wire is secure.

STILL NO SOUND

See your Authorize Sound Stream Dealer.

SOUND IN ONE CHANNEL ONLY

Reverse left and right speakers by unplugging the speaker connector. turning it over and plugging it back in.

SOUND IS NOW IN

OPPOSITE CHANNEL

Reverse RCA inputs

SOUND IS NOW IN

SAME CHANNEL

Problem is in the speaker of speaker wire of the silent channel

OPPOSITE CHANNEL		SAME CHANNEL
Reverse RCAs at head unit		Problem is in the Amplifier, See your
		local Authorized Dealer
	SOUND IS NOW IN
	SOUND IS NOW IN
OPPOSITE CHANNEL		SAME CHANNEL
Problem is in the head unit		Problem is in the RCA cables
or before the amplifier

RPOTECTION CIRCUIT

Short Circuit Protection engaged: The amplifier will turn off and try to come back on immediately. The amplifier will cycle like this indefinitely, with “blips” of sound each time If this is the case, check your speakers and wiring for low impedance and short circuits.

Thermal Protection engaged: The amplifier will turn off and several minutes later will come back on. In this case, ensure that there is nothing blocking the normal convective airflow of the amplifier. No obstruction n should be within 2.4” of the amplifier on all sides.

NOTE: Low battery voltage will cause the amplifier to run warmer and possibly damage the amplifier.